📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Tools

FRP Grating Engineering Tools

Three calculators that answer the questions buyers ask before they can price anything: how heavy is it, how far can it span, and how many panels does the deck take. Every figure comes from the tables published on this site, not from a separate model.

What is here

Each tool does one job and states its own limits. They are built to be usable by a buyer without an engineering background, and they are built to give the same answer as the published tables so that nothing on this site contradicts anything else.

  • Weight calculator - unit weight, panel mass and order mass for the six standard molded constructions.
  • Span and load calculator - allowable uniform load at any clear span from 600 to 1200 mm, interpolated between the published table points.
  • Panel layout calculator - panels needed, joint lines to cut, offcut percentage and order mass for a deck area.

Weight calculator

Answers how heavy the panel is and what the order weighs. Useful for the lifting plan, for the dead load you are adding to an existing structure, and for sanity-checking a freight quote.

Open the FRP grating weight calculator →

Span and load calculator

Answers what uniform load your clear span can take. The usual finding is that the span, not the load, is the problem, and that adding a support beam is cheaper than buying a heavier panel.

Open the FRP grating span and load calculator →

Panel layout calculator

Answers how many panels a deck takes and how much is cut away. The arithmetic is simple; the hard part is that panel joints have to land on beams, which is why the tool also says what it does not know.

Open the FRP grating panel layout calculator →

What these tools are not

They are planning aids, not design documents. No tool here checks point loads, support bearing, chemical environment, temperature derating, fatigue or fire. Where the answer decides whether a platform is safe, an engineer signs the design against the actual support grid.

What we can give you quickly is the data behind the numbers: section properties, the tested reports we hold, and a written check for a load case you send us. Ask for it before you commit to a span.

Related pages

FAQ

Are these calculators free to use?
Yes, and they need no email address. The figures come from the load and weight tables published on this site.
Do the tools give a stamped design?
No. They give planning figures. A design that decides safety is signed by an engineer against your support layout and load case.
Where do the weight and load figures come from?
From the published nominal weight table and the load table at roughly 1% of span deflection, both shown on the product and specification pages.
Can I get the underlying data as a spreadsheet?
Yes. Ask for the load table and weight table in Excel or a PDF data sheet, and it is sent with the quotation.
Which tool should I start with?
Start with the span and load calculator if you already know the beam spacing. Start with the weight calculator if you are checking handling or freight.
Do the tools work on a phone?
Yes. They are plain pages with no external scripts, and they work offline once loaded.

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]