Downloads and Document Pack
Technical data, load guidance, fixing detail and the document pack, organised by what you actually need to specify or install a deck.
Technical data by section
Every section we produce has a specification page: bar depth and pitch, open area, unit weight, resin options, and the load and span guidance for that section. Start there rather than from a general brochure, because the numbers differ by section.
If you are comparing two sections, the specification pages are written to be read side by side: same fields, same order, so a difference is visible rather than hidden in prose.
- Pultruded T-bar and I-bar sections, 25 to 76 mm
- Molded sections from mini mesh to 50 mm
- Open area variants: 18% for high load, 60% for drainage
- ADA-compliant 38 mm section for public access decks
Load and span guidance
Load guidance is published per section with the deflection limit stated. Treat published figures as indicative and the certified table for the supplied section as the reference for design.
Where a deck needs a check rather than a table lookup, the enquiry should carry the span, the load case, the deflection limit and whether the load is uniform or a wheel.
Fixing detail
Clip types are documented one page each: M, C, L, W, T and saddle, with the application each is intended for, the bolt and material, and the quantity basis per square metre.
Clip quantity is set by span and uplift, not by habit. The clip pages state the basis so the quantity can be checked against the deck.
Standards pages
The load and design basis pages summarise the standards commonly applied to grating decks: DIN 24537, EN ISO 14122, OSHA 1910 and RAL-GZ 638. They describe what each standard addresses rather than claiming that a product is approved under it.
Use them to write the specification, then confirm the product against the standard with the supplier before the order.
Documents by email
PDF datasheets, load tables, installation instructions, certificate copies, third-party reports and resin batch certificates are issued by email on request. Write to [email protected] and state which documents and which project.
We send current copies rather than posting undated scans, so that the document you hold reflects the status now. That applies to certificates and test reports in particular.
- Which document, for which section or product
- The project or order it relates to
- Whether an original or certified copy is needed, and by when
What is not downloadable, and why
Certificate numbers, third-party report numbers and batch records are not published as public downloads. They are issued per enquiry or per order.
The reason is simple: a document is only evidence if it can be matched to a product and a date. An undated download cannot be checked with the issuing body, so it protects nobody.
Related pages
- Certifications and verification
- Laboratory and testing
- Grating specifications by mesh and depth
- Fixing clips, one page each
- Standards: DIN, EN ISO, OSHA, RAL
