Certifications and Third-Party Verification
What we hold, what each document covers, and how to obtain a current copy. Certificate numbers, scope and validity are sent on request so that what you receive is current, not an undated scan. The first page of each document is reproduced below with the certificate number and the dates masked.
What can be evidenced, and how
The documents below are held for the FRP and GRP grating produced at our Nantong plant. We do not publish the certificate numbers on the website, because a number printed on a page can be read as a current claim long after it has expired. Instead, we send a current copy with your quotation or on request.
This is a deliberate choice, not a gap. A buyer who needs to verify status can check the number and the validity with the issuing body, and that check only works if the number is current.
| Document | What it covers |
|---|---|
| ISO 9001 certificate | Quality management system for the manufacturing site |
| ABS Product Design Assessment | Third-party design assessment of the grating product |
| SGS test report | Third-party testing of the product against the named standard |
| Intertek ASTM F3059 report | Marine FRP grating specification testing |
| Resin batch certificates | Resin grade used for a specific production batch |
Certificate first pages, with numbers and dates masked
These are the opening pages of the three documents, taken from the files we hold. The registration or certificate number and every date have been covered, because a number on a public page can be read as a current claim long after it has expired. The unmasked original is what we send by email.



If you need to verify status, ask for the unmasked copy and check the number with the issuing body. That is the only check that proves anything, and it needs a number you can read.
ISO 9001 quality management system
ISO 9001 covers the management system at the manufacturing site: how incoming resin and glass are controlled, how production is recorded, how non-conforming panels are handled, and how complaints are traced back to a batch.
It does not certify a product. It certifies that the process which makes the product is controlled and auditable. That is the part a buyer can rely on when a repeat order has to match the first one.
ABS Product Design Assessment
The ABS document we hold is a Product Design Assessment (PDA), issued through the ABS technical office in Shanghai. It is a third-party assessment of the design against the ABS Rules, carried out by a classification society rather than the manufacturer.
A PDA is not Type Approval, and the certificate says so itself. It also carries its own validity window and states that use on a classed vessel contracted after that window requires re-evaluation. That is why we send the current copy and not a fixed figure on a page: the date is the part that matters.
Marine, offshore and jetty projects are the ones that ask for this document, because the buyer cannot inspect the factory. If your project is classed, tell us the class and the standard and we will confirm what the document covers before you rely on it.
SGS and Intertek test reports
Third-party test reports from SGS and Intertek cover the properties that are tested rather than the whole product. A load test report evidences load behaviour on the tested specimen; a specification report evidences the properties named in that specification. Neither is a general certificate of quality.
We send the report that matches your question. If you need a property that has not been tested on the section you are buying, the honest answer is that it needs a new test, and we will say so.
ASTM F3059 marine grating testing
ASTM F3059 is the specification for fibre-reinforced polymer gratings used in marine construction and shipbuilding. The Intertek report on file covers an eight-page programme of testing on FRP grating at the Shanghai Fengxian laboratory.
Read the report for what was tested, not as a blanket approval. A specification test evidences the properties it names, on the specimens it used. Where a property is not in the report, the honest answer is that it has not been tested.
If your project also requires a surface flame spread class, that is a separate ASTM E-84 test. Tell us the class required and we will say whether a report exists for the grade you are buying, rather than implying one exists for every product.
How to request a document pack
Email [email protected] with three things: which document you need, the project or order it relates to, and the consignee or end user name if the certificate has to be issued in a particular form.
Documents are sent as PDF scans by email. Where a project needs the original or a certified copy, say so at the enquiry stage, because that has a lead time of its own.
- Which document: ISO 9001, ABS, SGS report, Intertek report, ASTM E-84, resin batch certificate
- The project or order reference it relates to
- Whether a plain copy, a certified copy, or an original is required
What we will not do
We will not publish a certificate number we cannot currently substantiate, and we will not describe a test report as covering a property it did not test. If a requested document does not exist for the product you are buying, we will tell you what does exist and what a new test would involve.
That standard is why the pages here describe document types rather than making a blanket claim. A buyer comparing suppliers should treat a generic "certified" badge with less confidence than a document they can open and read.
Related pages
- Laboratory and testing capability
- Downloads and document pack
- Grating specifications by mesh and depth
- GRP grating manufacturer profile
- Contact and RFQ
