📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Tool

FRP Grating Weight Calculator

Mass decides the lifting plan, the dead load on the structure, the freight bill and how many people carry a panel. This tool gives the nominal weight for the construction you select, from the same table we publish on the product pages.

What the calculator returns

Four numbers, all of which a buyer needs before an order is packed: unit weight in kg per square metre, the same figure in lb per square foot, the mass of one panel at your size, and the total mass for the quantity you enter.

The unit weight comes from the published nominal table for standard molded construction. Panel mass is simply unit weight times panel area, so a 1220 x 3660 mm panel of 38 mm square mesh comes out at about 87 kg. That single figure explains most of the handling complaints on site.

Nominal weight by construction

These are the figures used by the calculator. They are nominal for standard construction with polyester or isophthalic resin, standard bar thickness and no grit top.

ConstructionWeightOpen area
Molded 25 mm, 38 x 38 meshabout 12.5 kg/m² (2.6 lb/ft²)68%
Molded 30 mm, 38 x 38 meshabout 15.0 kg/m² (3.1 lb/ft²)66%
Molded 38 mm, 38 x 38 meshabout 19.5 kg/m² (4.0 lb/ft²)68%
Molded 38 mm, 40 x 40 meshabout 18.0 kg/m² (3.7 lb/ft²)70%
Molded 50 mm, 50 x 50 meshabout 27.0 kg/m² (5.5 lb/ft²)60%
Molded 65 mm heavy duty, 50 x 50 meshabout 38.0 kg/m² (7.8 lb/ft²)56%

Enter your panel

Weight calculator

Pick a construction, enter the panel size, get the mass per square metre, per panel and for the whole order.

Weights are nominal for standard construction. Grit surface, closed tops, non-standard resin and thicker bars add mass; the packing list on the quotation is the figure that counts.

Where the weight actually goes

Three places. First, the structure: every square metre of 38 mm grating adds about 19.5 kg of permanent dead load, and a walkway 1.2 m wide and 20 m long carries roughly 470 kg of grating before anyone stands on it. On a retrofit that is often the number that decides whether the steel below needs work.

Second, the lift. A full 1220 x 3660 mm panel of 38 mm grating is close to 90 kg, which is a two-person carry at best and a crane lift on a roof. Many projects are cut to 1220 x 1830 mm or smaller purely so two people can handle a panel without a hoist, which costs more joints but saves the crane.

Third, freight. Grating is light for its volume, so sea freight is charged on volume rather than mass. A container filled with 38 mm grating cubes out long before it weighs out, which is why the price per square metre barely moves with weight and why nesting panels tightly matters more than shaving kilos.

Worked examples

A 1.0 x 2.0 m platform of 25 mm square mesh: area 2.0 m2, unit weight 12.5 kg/m2, so 25 kg. One person walks it into place.

The same platform in 38 mm: 39 kg. Still a two-person lift, and the extra 14 kg buys a much stiffer panel over the same span.

A 40 m2 deck in 50 mm: 40 x 27 = 1,080 kg. At 1,220 x 3,660 mm per panel that is 8.96 panels, so nine panels ordered, of which the cut remainder is scrap unless it fits another bay.

What adds weight that the table does not show

  • Grit or quartz-gritted top surface: the grit layer adds mass, and the added figure depends on the grit grade, so ask for it rather than assuming.
  • Thicker bars or a heavier duty construction: the 65 mm heavy duty panel is roughly double the 38 mm panel per square metre.
  • Vinyl ester and phenolic resin: similar order of magnitude, but not identical, and phenolic panels are usually specified by thickness rather than by weight.
  • Covered or solid-top grating: the cover plate is the dominant mass, not the grating bars.
  • Packing: crates, pallets and edge protection are excluded from every figure here, and they are what turns a 1,080 kg order into a 1,300 kg shipment.

Assumptions and limits

The unit weights are nominal published figures for standard construction. They are accurate enough for planning a lift, sizing a pallet and estimating freight, and they are not accurate enough to settle a weighbridge dispute. The packing list on the quotation, taken from the actual production batch, is the figure that counts.

If your project has a hard weight limit, on a roof or on a suspended walkway, say so before the order is released. Thickness, mesh and panel size can all be traded against mass, and changing them after the panels are molded is not possible.

Related pages

FAQ

How much does FRP grating weigh per square metre?
About 12.5 kg/m2 for 25 mm molded grating, 19.5 kg/m2 for 38 mm and 27 kg/m2 for 50 mm, all for standard 38 x 38 or 50 x 50 mesh. Use the calculator above for the construction you are buying.
How heavy is one 1220 x 3660 mm panel?
A 38 mm molded panel of that size is about 87 kg. A 25 mm panel of the same size is about 56 kg, and a 50 mm panel about 121 kg. That is why most sites cut panels down before installing them by hand.
Is FRP grating lighter than steel grating?
Yes, roughly one quarter to one third of the mass of an equivalent steel grating. The comparison that matters is not only dead load but handling: a panel that two people can carry changes the installation method and the crane cost.
Does grit top add weight?
It adds mass, and how much depends on the grit grade and coverage. Ask for the figure for the grade you are specifying rather than adding a guessed percentage.
Can I get a weight certificate for my shipment?
Yes. The packing list gives the calculated mass and the actual weighbridge figure at loading, and both can be issued with the shipping documents.
Why is freight charged on volume if grating is light?
Because grating cubes out before it weighs out. A container fills with panels long before it reaches its weight limit, so nesting and panel size decide the freight cost more than the kilos do.

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]