📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout

Is FRP Grating Fire Resistant?

Quick Answer
Direct Answer

It can be. Standard polyester is not fire-rated; fire-retardant and phenolic grades reach ASTM E-84 Class 1 with low flame spread, and phenolic is the usual choice where smoke matters.

  • Best for: offshore, tunnels, public buildings, battery and energy rooms
  • Not for: standard polyester where a fire class is specified
  • Key spec: ASTM E-84 Class 1, ASTM F3059 report, smoke index

Standard polyester grating is combustible and will burn. Fire-retardant grades limit flame spread and self-extinguish, and phenolic grades are used where a fire performance class is mandatory. Which one applies depends on the standard the project is designed to.

Is FRP grating fire resistant?

It can be. Standard polyester is not fire-rated; fire-retardant and phenolic grades reach ASTM E-84 Class 1 with low flame spread, and phenolic is the usual choice where smoke matters. Standard polyester grating is combustible and will burn. Fire-retardant grades limit flame spread and self-extinguish, and phenolic grades are used where a fire performance class is mandatory. Which one applies depends on the standard the project is designed to.

Standard isophthalic polyester has no fire-retardant additive and is not appropriate where a fire class is specified. Fire-retardant polyester and vinyl ester include additives that reduce flame spread and cause self-extinguishing behaviour. Phenolic resin has the lowest smoke and toxic emission profile and is the specification for offshore modules, tunnels and enclosed transport areas.

Do not treat fire retardant as a single property. Ask which grade and which test result, because the answer differs by product. A class claim without a report number is not evidence; the report covering the exact grade and product is.

The answer is yes if the project specifies a fire class, and no on the standard polyester grade. The three steps are: name the standard and the class in the enquiry, ask for the test report covering the exact product, and keep the report number with the safety file. A class claim without a report is not evidence.

Phenolic FRP grating with fire-retardant resin for offshore service

Resin grades, flame spread and smoke

The table below matches the four common resin systems to flame spread, smoke production and the class they can reach. Pick the resin by the fire strategy document, not by the adjective on a datasheet.

Standard polyester has the highest flame spread and smoke and is not fire-rated at all. Fire-retardant polyester and FR vinyl ester reach Class 1 on flame spread with reduced smoke, and FR vinyl ester adds chemical resistance on top. Phenolic is the low-smoke, low-toxicity choice for offshore, tunnels and enclosed transport.

Read the table by the fire strategy, not by the adjective. Standard polyester has the highest flame spread and smoke and is not fire-rated at all, suitable only where no fire class is specified. Fire-retardant polyester and FR vinyl ester reduce flame spread and smoke and reach Class 1, with FR vinyl ester adding chemical resistance on top.

Phenolic has the lowest flame spread and the lowest smoke, reaching Class 1 with the low-smoke profile required for offshore modules, tunnels and enclosed transport. The four grades are not interchangeable: pick the resin the fire strategy names, and ask for the report covering that exact resin and product family.

Resin systemFlame spreadSmokeClass
Standard polyesterHighestHighNot fire-rated
Fire-retardant polyester / vinyl esterReducedReducedClass 1 achievable
PhenolicLowestLowestClass 1, low smoke
FR vinyl esterReducedReducedClass 1, chemical + fire

What the tests actually measure

Surface flame spread tests such as ASTM E-84 measure how far flame travels across a surface and how much smoke is produced. They do not measure the structural capacity of the panel during a fire. That distinction matters: a panel can pass a flame spread class and still lose stiffness quickly at temperature.

ASTM F3059 is the grating-specific standard, covering fire and structural performance for the product family. EN 13501-1 is the European reaction-to-fire classification, and the IMO FTP Code governs marine surface spread of flame on ships and offshore modules. Each standard answers a different question in the fire strategy.

Structural fire design is a separate question from material class. A phenolic deck survives as a drainage and access surface; it is not a fire barrier, and the primary steel frame still needs its own passive protection. Specify the resin for the surface, and protect the structure on its own line.

Surface flame spread tests such as ASTM E84 measure how far flame travels across a surface and how much smoke is produced. They do not measure the structural capacity of the panel during a fire.

How to specify a fire-rated grating

Name the standard and the class, not the adjective. Write ASTM E-84 Class 1 flame spread, or the class from the project fire strategy document. Then ask for the test report covering the specific product. A supplier who can produce the report for the grade quoted is answering the question; one who answers with fire retardant is not.

General industrial walkways and water treatment: standard is often accepted, though fire-retardant is increasingly specified as a default. Offshore, tunnels, enclosed car parks and transport: phenolic or a specified fire-retardant grade with the class named. Battery and energy rooms, public buildings and escape routes: phenolic where smoke toxicity matters.

If the project has a fire strategy document, the grating specification has to answer to it, not to a general claim on a datasheet. Send us the relevant clauses and we will match the resin, the report and the documentation to the strategy.

General industrial walkways and water treatment often accept standard grade, though fire-retardant is increasingly the default. Offshore, tunnels, enclosed car parks and transport move to phenolic or a specified FR grade with the class named. Battery and energy rooms, public buildings and escape routes need phenolic where smoke toxicity matters. Send us the fire strategy clauses and we will match the resin to them.

Name the standard and the class, not the adjective: for example "ASTM E84 Class A flame spread", or the class from the project fire strategy. Then ask for the test report covering the specific product.

Test reports and the evidence file

We supply the ASTM F3059 report (number 211122012SHF-001) covering our fire-rated product family, and production runs under ISO 9001 registration 01708Q11888R0S, valid to 30 December 2028. The report, the datasheet and the packing list all carry the same resin grade, so the evidence file matches the panels on the deck.

For European projects we work to EN 13501-1 reaction-to-fire classes, and for marine work we reference the IMO FTP Code surface-spread requirements. Ask for the report, not the claim: report number, test date, product family and the exact resin grade must all be on the document.

We do not claim an ABS Product Design Assessment as a current certificate, because that assessment has expired. Where a project requires a marine class, we supply the F3059 report and the relevant reaction-to-fire documentation, and the project engineer closes the marine approval through their own classification route.

We supply ASTM F3059 report 211122012SHF-001 for our fire-rated product family, and production runs under ISO 9001 registration 01708Q11888R0S, valid to 30 December 2028. For European projects we work to EN 13501-1, and for marine work we reference the IMO FTP Code surface-spread requirements. The report, the datasheet and the packing list all carry the same resin grade.

Installation, edge sealing and fire detailing

Fire-rated decks need the same edge sealing as any other FRP deck, plus a little extra attention to gaps. Seal every cut and drilled hole with matching phenolic or FR resin, so the exposed glass does not become a wick for flame or water. Factory-cut panels are sealed before dispatch; site cuts are not.

On offshore modules, panels are clipped with SS316 fixings at the spacing the uplift and fire detailing require. Do not notch a bearing bar in the field on a fire-rated deck without re-checking the load table, because a damaged bar changes both the structural and the fire performance of the panel.

Where the grating meets a wall, a curb or a steel frame, the joint detail is part of the fire strategy. Open joints let hot gas pass; sealed or fire-stopped joints keep the surface performance intact. Send us the joint detail and we will return the matching edge trim and clip schedule.

On offshore modules, seal every cut and drilled hole with matching phenolic or FR resin, so the exposed glass does not become a wick for flame or water. Do not notch a bearing bar in the field on a fire-rated deck without re-checking the load table, because a damaged bar changes both the structural and the fire performance of the panel.

Cost: fire-rated is a small premium, a large risk avoided

Phenolic and FR vinyl ester cost more per square metre than standard polyester, but the premium is small against the cost of a failed fire strategy, a delayed offshore module or a rejected safety inspection. MOQ is 10 m2 and lead time is 12-36 working days from a confirmed drawing, so even a small tunnel or battery-room package runs through the same line as a full offshore deck. Oversized panels, custom colours, new moulds and specialty resins are quoted with a separately confirmed schedule.

Our plant is 20,000+ m2 with 200+ staff and 40+ export countries. Fire-rated panels for offshore, tunnels, energy and public buildings ship with the F3059 report, the ISO 9001 record and the packing list all matching, so the customs file and the safety file close on the same shipment.

When you compare fire-rated quotes, compare the report number, the test date, the resin grade and the smoke index together. A Class 1 claim without a report is not evidence. Send us the fire strategy clauses and we will return the resin, the class and the documentation that close the file.

Phenolic and FR vinyl ester cost more per square metre than standard polyester, but the premium is small against a failed fire strategy, a delayed offshore module or a rejected safety inspection. On a 30-year offshore life, the resin premium is a rounding in the budget; the fire strategy rework is a line that can shut the project down.

Does FRP grating burn?
Standard polyester grating is combustible and burns. Fire-retardant polyester and vinyl ester limit flame spread and self-extinguish; phenolic is used where low smoke and low toxicity is required, reaching ASTM E-84 Class 1 with the lowest smoke profile.
What does ASTM E84 measure?
Surface flame spread and smoke developed index, measured on a sample in a tunnel furnace. It does not measure structural performance during a fire, and it does not rate the panel as a fire barrier. Structural fire design is a separate question.
Which grade is used offshore?
Phenolic is the usual specification for offshore modules because of its low smoke and low toxicity profile, reaching Class 1. FR vinyl ester is used where chemical resistance is also required, and standard polyester stays on general industrial walkways without a fire class.
Can I get a fire test report for the product?
Ask for the report covering the exact grade and product family. We supply ASTM F3059 report 211122012SHF-001 for our fire-rated range. A class claim without a report number and test date is not evidence for the safety file.
Is FRP grating a fire barrier?
No. It survives as a drainage and access deck in a fire, with phenolic giving low smoke and limited flame spread. The primary steel frame still needs its own passive fire protection; the grating answers the surface-spread question, not the structural one.
ZEALL Engineer

FRP Grating Technical Team

FRP composite industry expert with 20+ years of experience in the design, engineering and manufacturing of FRP gratings for corrosion-resistant and heavy-duty applications. Published by NANTONG ZEALL NEW MATERIALS CO., LTD.

Published: 2026-09-09 |Category: Quick Answer|Author: FRP Grating Technical Team
Have Questions? Contact Us →
Previous Article
Is FRP Grating Slip Resistant?

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]