Anti-Slip FRP Grating

Anti-slip FRP grating keeps people safe where floors get wet, oily or icy. ZeAllgrate produces fiberglass grating with engineered anti-slip surfaces — coarse quartz grit bonded to the top, or moulded concave (serrated) bars — so traction stays high even when walkways are damp, chemical-wet or coastal. Anti-slip grating is specified for offshore helideck access, food plants, swimming-pool surrounds, ramps, stair treads and trench covers.

Gritted Surface

Coarse aggregate grit is bonded to the top surface of the panel, producing an aggressive, long-wearing walking surface. Best for wet, oily and pedestrian-heavy zones and for barefoot or wet-shoe areas.

Concave / Serrated Surface

The top of each bar is moulded with a concave/serrated profile, giving a built-in grip that wears down with the bar rather than a bonded layer. Ideal for forklift and cart traffic and moderate-slope ramps.

Smooth Surface

A smooth top is reserved for light-duty, clean indoor drainage and cable-trench covers where foot traffic is occasional.

Gritted FRP Grating

Gritted FRP grating bonds quartz grit into the top resin layer for maximum slip resistance in wet, oily and coastal areas.

Concave Surface FRP Grating

Concave surface FRP grating uses concave bearing bars with serrated tops to shed water and keep grip where panels stay wet.

By Environment

Wet/chemical service: gritted surface. Coastal/offshore and UV exposure: gritted + vinyl ester or UV-stabilised polyester. Forklift zones: concave surface in heavier thickness. Stair treads: gritted nosing for edge visibility.

Specifications & Applications

Available in 25/30/38/50 mm thickness in molded and pultruded form. See FRP walkway grating, stair tread grating and heavy-duty GRP grating. Full range on products.

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China