📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Application case

A Vinyl Ester Grating Deck for a Chemical Plant Platform

Acid mist, washdown and a walking load: a chemical plant platform is the case where the resin, not the thickness, decides the service life. This is how the deck is specified from the environment backwards.

This is an application case rather than a client reference: it sets out how a deck for this service is specified, using the constructions and grades published on this site. Client names and site photographs are released only with the client agreement.

What the environment does to a deck

A chemical plant platform is usually wet, often acidic, and regularly washed down. Three mechanisms shorten a deck life: resin attack at the surface, glass exposure where the surface layer has been abraded, and corrosion of the fixings.

Isophthalic polyester handles dilute acids and general industrial atmosphere well. Vinyl ester is the grade for concentrated acids, alkalis, bleach and solvent exposure, and it is the grade to choose where the washdown chemical is unknown or changes.

How the deck is built

  • Panel: molded grating, 38 mm, vinyl ester resin, 38x38 mesh, grit top where the floor is wet
  • Bearer: pultruded I-beam, vinyl ester, grade E17, spaced to keep the panel inside its load table
  • Clips: SS316, matched to the bar depth, one at every joint on a bearer
  • Handrail: round tube 40 mm on square posts with base plates, vinyl ester resin, SS316 hardware
  • Edge: angle trim on the perimeter so the panel edge is closed and the walkway width is defined

The four numbers the quote needs

Clear span between bearers, the uniform load, the chemical service, and the area. Those four decide the construction, the resin, the fixing grade and the price. A specification that gives only the area and a thickness cannot be priced honestly, which is why our enquiry form asks for the span first.

Where these decks fail, and why

The failure we see described most often is not a broken panel. It is a deck that has lost its surface: the grit worn away in the traffic lanes, the resin chalked, the glass visible at the busiest point. That is a resin and surface choice made for price, and it appears in year three, not year one.

The second is the fixing. A 304 clip in a chloride or acid washdown environment is the cheapest part of the deck and the first to go, and when a clip goes the panel lifts at the edge and the deck becomes a trip hazard.

Related pages

FAQ

Which resin is right for a chemical plant platform?
Vinyl ester where acids, alkalis, bleach or solvents are present. Isophthalic polyester where the exposure is general industrial atmosphere and dilute washdown.
What panel thickness for a walkway?
38 mm molded grating covers most walkways at 600 to 900 mm bearer spacing. The span, not the habit, decides the thickness.
Which clips for a chemical plant?
SS316, matched to the bar depth, at every panel joint on a bearer. SS304 is a false economy in chloride or acid service.
Should the bearers be the same resin as the panel?
Yes. A vinyl ester panel on a polyester bearer leaves the load path in the weaker resin.
Can you supply the full deck as one package?
Yes: panels, bearers, clips, handrail and edge trim, with the cut list and the joint details.
Do you publish a chemical resistance table?
Yes, a resistance guide by chemical family, and a specific recommendation for a named chemical on request.

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]