Grating Clips and Fasteners
Six fixing types, one per joint condition. The clip is the cheapest part of the deck and the one that decides whether the panels stay where they were drawn.
The six types
| Clip | Joint it serves | Page |
|---|---|---|
| M-clip | Standard panel-to-bearer fixing | /frp-grating-clip/m-clip/ |
| C-clip | Panel edge to a bearer, compact profile | /frp-grating-clip/c-clip/ |
| L-clip | Corner and edge return fixing | /frp-grating-clip/l-clip/ |
| W-clip | Wide bearing washer for thin flanges and grit surfaces | /frp-grating-clip/w-clip/ |
| T-clip | Panel joint over a shared bearer | /frp-grating-clip/t-clip/ |
| Saddle clip | Heavy duty U-form clamp for deep bars and uplift | /frp-grating-clip/saddle-clip/ |
Material and hardware
Clips are supplied in SS304 or SS316, with bolts and nuts included, and the choice is set by the environment rather than by price: chlorides and chemical washdown push the joint to 316, and a 304 clip in a coastal plant is a false economy measured in months.
Where the clip contacts the FRP directly, the fixing is designed so that the bolt does not bear on a thin bar edge. A clip that concentrates load on one bar crushes the bar before it fails itself.
How many clips
The count follows the panel joints and the support lines, not a fixed number per square metre. Every panel edge that lands on a bearer needs a fixing, every shared joint needs one, and every panel that could lift under wind or uplift needs one at the corners as well as the mid-span.
The take-off is usually short by ten to twenty percent on the first order, which is why clips are quoted with the panels rather than bought separately on site.
Related pages
- Which clip is standard for grating panels?
- SS304 or SS316 clips?
- How many clips does a panel need?
- Can clips be used with pultruded grating?
- Are bolts included?
- Do you supply clips separately from panels?
FAQ
FRP Grating Clamp and Fiberglass Grating Clamp: How the Clamp Holds the Panel
A FRP grating clamp works by straddling the bar of the panel and pulling it down against the bearer with a single bolt. The formed seat distributes the clamp load across the top of the bar instead of point-loading a resin edge. A fiberglass grating clamp is identical hardware — the word "fiberglass" only names the fibre in the panel — and it is fitted by hand with a standard spanner, no welding and no hot work on site.
The clamp is specified at four per panel, one at each corner, and it stays tight under vibration because the bolt thread is captured in a formed channel rather than resting on the cut end of the bar. Where the bearer flange is thin or the grit surface uneven, a W-clip washer spreads the load and keeps the clamp seated.
Fibreglass Grating Clamp, FRP Grating Fastener and Fiberglass Grating Fastener: Type Selection
A fibreglass grating clamp (UK spelling) is the same part as the North American "fiberglass" version, and on a structural specification it is more likely to be called an FRP grating fastener or a fiberglass grating fastener. The type code — M, C, L, T, W or Saddle — tells you the geometry, and the material code (SS304, SS316, galvanized, 6061 aluminium) tells you the corrosion class.
Match the type to the joint: M for standard panel-to-bearer laps, C for compact edge returns, L for corners, T for panels meeting over a shared bearer, W for thin flanges, Saddle for deep pultruded bars and uplift. Match the material to the environment: 304 indoors and for routine washdown, 316 by the coast, the pool or in a chemical plant.
Grating Mounting Clip: On-Site Fixing Practice
A grating mounting clip is the on-site term for the same hardware, and it is installed by one worker without a second pair of hands to lift the panel. Each panel is lowered onto the bearer, the clip is hooked over the bar, the bolt is inserted and the nut is run down hand-tight. Final torque is set once the whole run of grating is laid, so the panels can shift into alignment before they are locked.
We supply clips in kits matched to your panel schedule: four M-clips per standard moulded 38 mm panel, four C-clips per thin 25–30 mm edge panel, four L-clips per corner piece, four to six Saddle clips per heavy pultruded panel. MOQ is 10 m² of matched grating; lead time is 7–35 working days.
| Model | Material | Fits panel thickness | Clips per panel |
|---|---|---|---|
| M-clip | SS304 | Moulded 38 mm; pultruded 25 / 38 / 50 mm | 4 (one per corner) |
| C-clip | SS304 | Moulded 25 / 30 / 38 mm | 4 |
| L-clip | SS316 | Moulded 38 / 50 mm; pultruded 38 mm | 4 |
| Saddle clip | SS316 | Pultruded 50 / 65 mm, heavy duty | 4–6 |
| Z-clip | Galvanized steel | Moulded 38×40 mm | 4 |
| T-clip | 6061 aluminium | Pultruded 25 / 38 mm | 4 |
MOQ 10 m²; lead time 7–35 working days depending on quantity and finish.
FAQ
Also known as: clip, clamp, fastener — same family
A FRP grating clamp and a fiberglass grating clamp describe the same hardware in two words: "clamp" emphasises the squeezing action, "clip" the formed sheet-metal part. A fibreglass grating clamp is the UK spelling of the same product. The same fixing is sold as an FRP grating fastener or a fiberglass grating fastener on structural drawings, and a grating mounting clip on site labels. Moulded and molded refer to the same pan-moulded panel process.
See also: the full clip and fastener range, the dedicated FRP clips page, our FRP supplier page and the FRP grating range.
Anti Corrosion Grating Clip: Why Material Grade Decides Service Life
An anti corrosion grating clip is not a decorative part: it is the one steel element that touches a composite deck in a hostile atmosphere. In chemical plants, wastewater works and coastal walkways the clip corrodes before the panel does, and a rusted clip stains the fiberglass bar and seizes the bolt. Specifying the correct anti corrosion grating clip grade is therefore as important as choosing the panel resin.
We supply clips in three material paths. Galvanized carbon steel is the economical route for dry indoor framing. SS304 austenitic stainless steel covers general food, beverage and mild-humidity service. SS316, with molybdenum, is the anti corrosion grating clip grade for chloride, offshore and acid environments. Every batch is traceable under ISO 9001 certificate 01708Q11888R0S.
Full FRP clips and fasteners range, Dedicated FRP grating clips page, FRP grating panels
Heavy Duty Grating Mounting Clamp for Demanding Loads
A heavy duty grating mounting clamp is specified where uplift, forklift traffic or heavy vibration act on the deck. The saddle clip is the classic heavy duty grating mounting clamp: a deep U-form clamp that wraps a thick bearer and resists both upward pull and lateral slip. It is the correct choice for cooling towers, rooftops, crossover stairs and mezzanine platforms.
Heavy duty fixing is not only about steel gauge. The W-clip spreads the clamping force over a wider washer so a grit-topped or thin bar is not crushed, while the T-clip handles panel-to-panel joints on a shared bearer. Torque each heavy duty grating mounting clamp to the recommended value and leave one thread showing; over-tightening cracks the composite bar and under-tightening invites chatter.
M/C/L/W/T clip selection guide, FRP grating clips product page
Metal Grating Fastener for Composite Grating: An Engineering Overview
A metal grating fastener for composite grating is the discrete hardware that turns a stack of pultruded or molded panels into a safe deck. Because FRP bars do not weld like steel, every joint depends on a mechanical clip: M-clip for standard panel-to-bearer, C-clip for compact edge, L-clip for corner returns, T-clip for shared bearers and saddle clip for uplift. The right metal grating fastener for composite grating is chosen from the joint condition, not from price alone.
We manufacture grating on a 20,000+ m2 plant with 200+ staff and export to 40+ countries, and we pair every panel order with the correct fastener kit. MOQ starts at 10 m2 and lead time runs 12-36 working days. Oversized panels, custom colours, new moulds and specialty resins are quoted with a separately confirmed schedule. Load data follows ASTM F3059 certificate 211122012SHF-001, and R13 anti-slip surfaces are available on grit-topped panels.
Frequently asked questions
Use an SS316 clip. It is the anti corrosion grating clip grade for chloride and salt-spray exposure. Galvanized carbon steel only suits dry indoor framing.
Use a heavy duty grating mounting clamp (saddle or W-clip) wherever uplift, forklift traffic or strong vibration acts on the deck: cooling towers, rooftops, crossover stairs and mezzanine platforms.
Grating panels start at 10 m2 and lead time is 12-36 working days. Clips are shipped together with the panel kit, and we export to 40+ countries.
