FRP Square Tube — Pultruded Square Hollow Section
The section that is easy to bolt on all four sides and easy to join at a corner. Square tube is the default for posts, frame members and the base of a handrail system.
What it gives you
A square hollow section has flat faces at ninety degrees, which makes it the easiest pultruded shape to detail. A bolt lands square on a face, a plate sits flat against it, two members meet at a true corner, and a post base needs no special fixture.
It also has reasonable torsional stiffness because the section is closed, though less than a round tube of similar mass, because the corners are further from the centre than the sides.
Where square tube is used
- Handrail posts, commonly 50 x 50 or 60 x 60 mm, with a base plate bolted to the deck.
- Frame members for platforms, guards and equipment enclosures, where the frame is a rectangle of square tube.
- Stair stringers and newel posts on FRP stair units.
- Support legs for small skids and plinths.
- Gate and fence posts, where the post has to take a hinge load and a wind load at once.
Behaviour and the corner detail
Bending about a face axis follows the same form as a flat bar, adjusted for the hollow core: the section is stiff about both face axes and weaker across the diagonal, as with any square section. In compression the closed square resists buckling better than an open profile of the same mass.
The corner detail is where square tube earns its place. Two members meeting at ninety degrees can be joined with an angle and bolts through both faces, with no welding and no special fitting. That is the detail that makes a small FRP frame buildable on site by two people with a drill and a spanner.
Detail notes
A post base is usually a plate bolted to the deck with four bolts, and the plate is the part that has to spread the load: a post bolted through its own wall at the base, with no plate, crushes the wall under any sideways load.
Where a square tube carries a handrail rail, the rail is often a round tube and the transition is a bracket or a short square section that steps down. That bracket is a part, not an improvisation, and it belongs in the take-off.
Specifying an FRP square tube
- Outside dimension and wall thickness, plus the length or cut list.
- Grade to BS EN 13706 where the tube is structural, with the modulus declared.
- Resin and colour, and whether the tube is exposed to UV.
- Base plate and joint details for posts, so that plate, bolts and tube arrive as a set.
- Fire requirement where the structure is indoors and a flame spread class applies.
Related pages
- GRP structural profiles overview
- FRP round tube
- FRP rectangular tube
- FRP handrail systems
- All FRP profiles
