📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
FRP Pultruded Profiles

FRP Rectangular Tube — Pultruded Rectangular Hollow Section

A closed section that is deeper than it is wide. It puts the depth where the bending is, costs less than a square tube of the same depth, and fits into the shallow space between a deck and a beam.

Why rectangular rather than square

Bending capacity follows depth squared, so a section that is deeper than it is wide buys stiffness without buying width. Where the member sits in a shallow construction depth, or where a wide section would intrude into a walkway, the rectangle is the section that fits.

It is also a closed section, so it carries torsion and resists buckling better than an open profile of the same mass, and it bolts flat on all four faces like a square tube.

Where rectangular tube is used

  • Frame members where the depth is available in one direction only, such as the rails of a low-profile guard.
  • Stringers and edge members where a wide section would reduce the walkway width.
  • Ladder stiles where the section has to be deeper than it is wide for bending under a person load.
  • Frames for screens, enclosures and equipment housings where the section doubles as the mullion.
  • Cable tray supports and light bearer members where a shallow, stiff section is wanted.

Behaviour

The section is stiff about the axis parallel to its depth and comparatively weak about the other, so orientation on the drawing is the whole design: rotated ninety degrees, a rectangular tube loses most of its capacity.

Because it is closed, the rectangle also resists the local buckling that a flat plate of the same depth would suffer, which is why a thin-walled rectangle can replace a solid flat bar at a fraction of the mass.

Detail notes

Bolting through the shallow faces is easy; bolting through the deep faces needs care because the bolt bears on a narrower face and the wall is usually thinner than the flange of an I-beam. Where a connection needs bearing capacity, the detail adds a plate rather than relying on the tube wall.

Where rectangular tube is used as a ladder stile, the rung connection is the design: the rung passes through or into the stile and is fixed with a plug or a plate, and a rung bolted only to the outer face of the stile is a rung that will loosen.

Specifying an FRP rectangular tube

  • Depth, width and wall thickness, and the orientation of the depth on the drawing.
  • Grade to BS EN 13706 where the member is structural.
  • Resin and colour, and UV stability for exposed frames.
  • Cut list and any prepared ends for rung or bracket connections.
  • Whether the tube is used as a bending member or a compression member, since the bracing differs.

Related pages

FAQ

When should I use rectangular tube instead of square tube?
When the construction depth only allows one direction to grow, or when a wide section would intrude into a walkway. The depth does the bending work; the width does not.
Which way up should a rectangular tube go?
With the depth vertical, in the direction of the bending load. Rotated, the section loses most of its capacity.
Is rectangular tube as strong as an I-beam?
For the same depth and mass, an I-beam is more efficient in one direction because the flanges sit further out. The rectangle wins where torsion or a closed face matters.
Can rectangular tube be used for ladder stiles?
Yes, and it is a common choice. The rung connection then becomes the critical detail.
What wall thickness do you supply?
Wall thickness follows the die and the load case; send the depth, width and load and we will confirm what can be pultruded.
What grade is available?
E17 or E23 to BS EN 13706, with the modulus declared where deflection governs.

Fiberglass Rectangular Hollow Tube: Pultruded Box Sections for Low-Profile Frames and Handrail Posts

The Fiberglass Rectangular Hollow Tube is the pultruded box section chosen where a square look, low height and high torsional stiffness are required. It is the standard choice for handrail posts, machine guarding frames, solar mounting rails, fence posts and equipment skids — non-conductive, non-corrosive and roughly 75% lighter than a steel box of equivalent stiffness.

Material, Resin and Wall Tolerance: How We Pull the Box

Each tube is drawn from continuous E-glass roving (60–75% by weight) with a surfacing veil for a resin-rich outer skin. Isophthalic polyester suits atmospheric and freshwater exposure; vinylester is for acid, alkaline and marine splash; polyurethane gives a smooth UV-stable surface. Wall thickness is held to pultrusion tolerances and sections are cut to a length list, drilled and routed. See the FRP pultruded profiles range and the structural profiles library; we are a direct FRP manufacturer since 2004 (20,000+ m² plant, 40+ export countries), shipping in 7–35 working days.

Pultruded Rectangular Tubes: Frequently Asked Questions

Can you open a custom die for a non-standard rectangular tube size?
Yes. We design pultrusion dies for rectangular hollow sections of custom outer dimensions and wall thickness from your drawing. Tooling takes typically 4–8 weeks; samples are approved before serial production.
What is the MOQ and lead time for FRP rectangular tubes?
MOQ starts at 10 m² equivalent for stock sections; custom dies require a minimum run agreed on the drawing. Standard lead time is 7–35 working days after order confirmation.
Which export trade terms do you support for rectangular tubes?
We ship EXW our factory, FOB Shanghai / Ningbo and CIF to your nominated port, with sea-worthy crating and full export documentation.

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]