📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
GRP Catwalk · Elevated Walkways · Pipe Rack & Access Routes

GRP Catwalk

A narrow elevated walkway that gets a person from one end of a plant to the other — over a pipe rack, along a tank farm, between two modules. GRP catwalks are the version that does not corrode, weighs a fraction of steel, and can be installed in an hour by two people instead of a crane crew.

BS 4592Modular KitsCorrosion-ProofNon-ConductiveISO 9001
Definition

What a Catwalk Is, and How It Differs From a Platform

A catwalk is a walkway that connects rather than a platform that holds. It is long and narrow, it exists to let a person travel along a route — along a pipe rack, over a bund, between two structures — and its design problem is the route, not the load. A platform is a place where work happens; a catwalk is a way of getting to that place.

The distinction changes what governs the design. On a platform the question is what is standing on it and what it has to carry. On a catwalk the question is how far the route runs, how it is supported along the way, and what happens at each end. Catwalk spans are usually shorter than people expect because the walkway is carried on a series of internal frames rather than on one long member, and the frames follow whatever the route crosses.

That is why a catwalk is usually supplied as a modular kit rather than as loose panels: a length of decking, a set of frames at fixed centres, a handrail post at each frame, and a rail run cut to length. Assembled in the factory and labelled by position, it goes up in the order it was drawn, which on a live plant is the difference between a one-day installation and a three-day one.

Terminology: GRP catwalk, FRP catwalk, fibreglass walkway, composite catwalk and GRP access walkway all describe the same product. Where the term changes the specification is in the handrail standard cited and in whether the walkway is designed to BS 4592 or to a client's own access standard.

Anatomy

What a Catwalk Is Actually Made Of

A catwalk is four systems working together, and a quote that covers only one of them is an incomplete quote. Buyers who order "catwalk panels" and discover the handrail is not included are the usual outcome of not asking.

1. The deck

GRP grating panel — moulded with a meniscus surface for grip, or pultruded where the deck has to be stronger or has to span further. Usually 600 to 1,000 mm wide, because a catwalk is narrow by definition.

2. The frames

Pultruded GRP profiles forming a ladder of cross-frames at fixed centres — typically 1.5 to 2 m apart — each supporting the deck and carrying a handrail post. The frames are the structure.

3. The handrail

Posts at every frame, a top rail, a mid rail and a kick plate or toe board. The handrail is a safety system, not a trim item, and its height and loading are specified rather than chosen.

4. The fixings

Panel clips, frame connectors and the base detail where the catwalk meets the structure. These are what make a kit go together in an hour rather than become a fabrication job on site.

A detail worth settling at enquiry stage: what the catwalk is supported on. A catwalk crossing a pipe rack bears on the rack; a catwalk over a bund bears on the ground or on a pair of legs; a catwalk between two modules is bolted to each module and spans the gap. Each of those is a different base detail, and the base detail is usually the thing that delays an installation.

Handrail

The Handrail Is the Part That Gets Audited

On any elevated walkway the handrail is what a safety inspector looks at first, and it is the part most often under-specified in a composite package. The numbers below are the ones that come up in a UK access audit.

ElementTypical requirementWhy it is specified rather than chosen
Top rail height1,100 mm above the walking surface for a general access routeSet by the access standard in force on the site, not by the supplier
Mid railA mid rail, or an infill, so the gap cannot be crawled throughA single top rail passes the eye and fails the audit
Toe board / kick plateUsually 100 mm minimum at the deck edgeStops a tool being kicked off the walkway onto whatever is below
Horizontal loadThe rail must resist a person leaning on it, not just its own weightA handrail specified by appearance rather than load will deflect visibly
Post spacingSet at the frames, so rail deflection follows the frame pitchWider post spacing means a rail that sags between posts

An honest note on standards: the handrail on an elevated walkway is governed by the site's access standard and by the applicable national regulation, and those requirements can be more demanding than the grating standard. A GRP handrail system supplied to BS 4592 covers the walkway; whether it satisfies the site's own access policy is a separate question, and one worth asking before the order rather than after the installation.

Structure

Span, Support and the Frame Pitch

A catwalk is not usually designed as one long beam. It is designed as a series of short frames, and understanding that is what makes the spans look surprisingly short to a buyer who is used to platforms.

  • The frame pitch sets everything. Frames at 1.5 to 2 m means the deck spans 1.5 to 2 m, and a standard panel covers that comfortably. Wider frame pitch is cheaper in frames and more expensive in deck.
  • The frames are the structure. Each frame carries the deck above it and a handrail post on it. The frame is a pultruded profile assembly, and it is the part the structural calculation is about.
  • Support points are where the route crosses something. A catwalk over a pipe rack might be supported every few metres by the rack itself; a catwalk over a bund is supported at its legs. The support layout follows the site, not a round number.
  • Deflection is the limit, not strength. A walkway that flexes under a boot feels wrong even if it is strong enough, so the design limit is usually span over 200 for a walkway, or tighter where the client wants a firm deck.
  • Thermal movement accumulates along the run. A long catwalk expands and contracts more than the structures it is fixed to, so the fixing detail has to allow for movement every few bays or the rail will work loose.
Why GRP

Why a Catwalk Is Often the Best Argument for Composite

The economics of a catwalk are unusual, because the material cost is rarely the largest number. On a live plant, the cost of installing the walkway — access, lifting, scaffolding, shutdown windows — is often larger than the walkway itself. That is where GRP wins decisively.

  • It goes up by hand. A GRP catwalk bay weighs a fraction of a steel one, so a two-person team installs it without plant. On a pipe rack or over a bund where a crane cannot reach, that is the difference between an installation and a postponement.
  • It needs no hot work. No welding means no hot-work permit, no fire watch and no shutdown of the area for the duration. On a live plant, that alone frequently justifies the material.
  • It arrives as a kit. Assembled and labelled by position, so the installation sequence is the drawing sequence rather than a site fabrication exercise.
  • It does not need painting. The walkway a plant forgets about for ten years is the walkway that still looks like a walkway, not the one that has rusted through at the joints.
  • It does not conduct. A catwalk running past electrical equipment is safer in a non-conductive material, and the argument holds at design stage as well as at audit.
  • It is not a scrap target. Metal walkways in accessible locations get partly dismantled for scrap. A composite one largely does not.

The honest counterpoint: a GRP catwalk is less stiff than steel, so a long unsupported span needs a deeper frame or more support points. Where the route crosses a wide gap with no intermediate support available, steel may be the simpler answer and saying so is more useful than selling a composite into a span it cannot comfortably take.

Comparison

GRP Catwalk Against Steel and Aluminium Catwalk

GRP catwalkGalvanised steel catwalkAluminium catwalk
Installation methodHand-carried; no crane in most casesCrane or plant for any real bayHand-carried for shorter bays
Hot work requiredNone; bolted connectionsWelding on site is commonWelding or bolting
CorrosionNone; no coating to renewGalvanising with a finite life; a re-painting programme followsGood in atmosphere; attacked by chloride
StiffnessLower modulus; frame depth or support points compensateThe reference; long spans are its strengthBetween the two
Grip when wetMeniscus or gritted deck, specified for the conditionDepends on the grating typeSmooth unless gritted
ElectricalNon-conductiveConductiveConductive
Site modificationCut and drilled with normal tools; dust needs controlCut and weldedCut and welded or bolted
Best fitLive plants, corrosive sites, routes where plant cannot reach, and electrical proximityLong unsupported spans and benign dry environmentsWeight-sensitive routes in a benign atmosphere

The summary that actually helps a buyer: choose GRP where installation access and corrosion are the real costs, which is most of the time on an operating plant. Choose steel where the route crosses a long gap with no intermediate support and stiffness governs. The material decision follows the site, not the other way round.

Applications

Where GRP Catwalks Are Specified

Pipe Racks

Access walkways along and across pipe racks for inspection and valve operation. The route is fixed by the rack, and the catwalk follows it without adding load a steel walkway would.

Tank Farms

Walkways between tanks and along bund walls. The exposure is the reason: a bund is a wet, sometimes corrosive place and a steel walkway there is a maintenance item.

Water and Wastewater

Walkways over channels, along tank galleries and between process units. Wet, frequently hosed down, and the environment where a composite walkway simply does not deteriorate.

Chemical Plant

Access routes through process areas, in vinyl ester where the atmosphere carries acid or solvent. The walkway is not the part of the plant that fails.

Coastal and Marine

Quayside walkways, jetty access routes and sea wall paths. Chloride, spray and no maintenance access, which is precisely where GRP earns its cost.

Offshore and Wind

Module walkways and turbine transition routes, where weight and the cost of sending a crew out both argue for a walkway that needs no coating.

Specification

What to Send for a Catwalk Quotation

A catwalk is a route, so the useful thing to send is the route rather than a panel size. The list below is what turns an enquiry into a quotation that does not come back with questions.

  1. The route. Length, width and what it crosses. A drawing or a sketch is enough, and far better than a description.
  2. Support points. Where the walkway can bear — on a pipe rack, on legs, on an existing structure — and the spacing available.
  3. Deck width and surface. 600, 800 or 1,000 mm, and meniscus or gritted, depending on whether the route is walked in wet conditions.
  4. Handrail requirement. Height, mid rail, toe board and the standard in force on the site. This is where a specification most often differs from the default.
  5. Access at each end. Whether the route ends at a platform, a ladder, a stair or a doorway, because the end detail is a different item in each case.
  6. Environment. Wet, chemical, coastal or benign, which decides the resin system — isophthalic, vinyl ester or phenolic.
  7. Installation constraints. Whether a crane can reach, whether hot work is permitted, and whether the plant must stay running. These three answers shape the kit more than any other.
  8. Certification pack. Datasheet, load and deflection data for the frame, handrail declaration and a certificate of conformity.

One question worth answering before the order rather than during installation: can the catwalk be delivered assembled and labelled by bay, or must it come as loose material? Assembled and labelled is almost always faster on site and almost always cheaper overall, even though the unit price looks higher.

Related

Related GRP and GRP/FRP Pages

More GRP guides: GRP grating price · GRP grating clips · GRP walkway grating · GRP trench cover grating · GRP stair tread grating

GRP Grating — Full Range

The complete overview: moulded and pultruded, resin systems, standards by market and terminology.

GRP Platform Grating

The deck a platform stands on — the place a catwalk usually leads to.

GRP Structural Profiles

The pultruded frames and handrail sections a catwalk kit is built from, to BS EN 13706.

GRP Grating Panels

Panel sizes, thickness, weight and load data for the deck itself.

GRP Grating Manufacturer

How the panel is made, and what a factory approval pack contains.

GRP Channel Grating

Trench, duct and drainage covers, for the openings a catwalk route passes over.

GRP Grating Suppliers

Supplier selection without the guesswork: documentation checks, commercial signals and the weight test that reveals glass content.

GRP Grating Supplier

Supply terms, MOQ, lead times, Incoterms, documentation pack and sea freight transit times.

Heavy Duty GRP Grating

50 and 60 mm panels and traffic load classes, for the cases a standard 38 mm panel cannot carry.

FAQ

GRP Catwalk — Frequently Asked Questions

What is a GRP catwalk?

A narrow elevated walkway that connects one place to another — along a pipe rack, between tanks, over a bund, or between two modules. It is a route rather than a place to work, which is the difference between a catwalk and a platform.

What is the difference between a catwalk and a platform?

A platform is where work happens and its design problem is the load. A catwalk is a way of getting to that place and its design problem is the route. A catwalk is normally longer, narrower, and supported on a series of internal frames rather than carrying heavy equipment.

What does a catwalk kit include?

Four systems: the deck (GRP grating panels), the frames (pultruded GRP profiles at fixed centres), the handrail (posts, top rail, mid rail and toe board), and the fixings. A quote that covers only the panels is an incomplete quote, and buyers who discover the handrail is extra are the usual outcome of not asking.

What handrail height does a catwalk need?

Typically 1,100 mm above the walking surface for a general access route, with a mid rail and a toe board. The exact figure is set by the access standard in force on the site. The handrail on an elevated walkway is often governed by the site's own access policy, which can be more demanding than the grating standard.

How is a catwalk supported?

On a series of cross-frames at fixed centres, typically 1.5 to 2 m apart, with the frames themselves bearing on whatever the route crosses — a pipe rack, a pair of legs, or an existing structure. The support layout follows the site rather than a round number.

Why use GRP instead of steel for a catwalk?

Because on a live plant the installation cost usually exceeds the material cost, and that is where GRP wins. It is hand-carried without a crane, needs no hot work or hot-work permit, arrives as a labelled kit, needs no painting, and does not conduct.

Does a GRP catwalk need hot-work permits?

No, because connections are bolted rather than welded. On an operating plant that removes a permit, a fire watch and often an area shutdown — frequently enough on its own to justify the material choice over steel.

How far can a GRP catwalk span?

The deck spans between frames, typically 1.5 to 2 m, which a standard panel covers comfortably. A long unsupported gap needs a deeper frame or more support points, because GRP is less stiff than steel. Where the route crosses a wide gap with no intermediate support, steel may be simpler.

Is a GRP catwalk slippery when wet?

Not if the deck is specified for it. A moulded panel with a meniscus surface gives grip when wet, and a pultruded deck can be supplied gritted. A smooth-top composite walkway would be slippery, which is a specification error rather than a material property.

Which resin for a coastal catwalk?

Vinyl ester. It resists chloride, spray and hydrolysis far better than polyester, and a coastal or marine route is exactly where the difference decides the walkway's life. Orthophthalic polyester is the system to avoid outdoors in aggressive service.

Can a catwalk be installed without scaffolding?

In many cases yes, because the bays are light enough to be lifted into position by hand from the structure they run along. That is one of the practical arguments for the material on a pipe rack or a tank farm where scaffolding would otherwise be the largest line in the programme.

Can you supply a catwalk assembled and labelled by bay?

Yes, and it is usually the faster and cheaper route overall even though the unit price looks higher. Assembled, labelled and delivered in installation order means the sequence on site is the sequence on the drawing rather than a site fabrication exercise.

Next Step

Request GRP Catwalk Pricing

Send the route — a sketch is enough — with the length, the width, where it can be supported and what it has to cross. You will get an itemised quotation for the deck, frames, handrail and fixings as one kit, and a straight answer if steel would serve the route better.

Request Catwalk Pricing → GRP Grating Calculator

NANTONG ZEALL NEW MATERIALS CO., LTD. · GRP catwalks and access walkways · ISO 9001 certified

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]