GRP Grating Price
What actually moves the price of a GRP grating panel, how the per-square-metre figure is built, and why two quotes for the "same" 38 mm panel can differ by 40 percent. This page explains the cost structure rather than hiding it behind a request form.
What Actually Drives the Price
Six variables explain almost all of the difference between two GRP grating quotes. If a supplier cannot tell you where their price sits on each of them, the number is not comparable.
Resin system
The single largest swing. Isophthalic is the baseline; vinyl ester adds cost but is the only correct choice for chloride, hypochlorite and continuous wet service. Orthophthalic is cheaper and only appropriate indoors.
Glass content
Molded panels run 25 to 35 percent glass by weight; pultruded run 60 to 70 percent. More glass means more strength per kilo and a higher price per kilo. A panel sold as "high strength" without a stated glass content is unverified.
Thickness and mesh
25, 30, 38, 50 and 60 mm panels use progressively more material. A 38 mm panel with 38x38 mesh weighs roughly 8 to 10 kg/m²; a 50 mm heavy-duty panel is substantially heavier. Mesh pitch affects both weight and load capacity.
Panel size and cutting
Standard 1000x4000 and 1220x3660 panels are priced per full panel. Custom cuts add a cutting charge and usually waste material, so a cut panel costs more per usable square metre than a stock panel.
Quantity and loading
Container loading is the real break point. A 20-foot container holds a finite number of panels; filling it properly spreads freight over more square metres. Part loads carry a disproportionate freight cost per square metre.
Certification and testing
Load test reports, resin batch certificates, fire test documentation and third-party inspection all carry a cost. Some buyers need none; some cannot clear customs or pass an audit without them.
How the Per-Square-Metre Figure Is Built
There is no single published price for GRP grating, and any page quoting one flat number is quoting a specific specification at a specific volume on a specific date. What is useful is knowing the structure of the figure.
| Component | What it covers | How it scales |
|---|---|---|
| Material | Resin, glass, filler, catalyst, release agent | Scales with panel weight and resin grade |
| Moulding or pultrusion labour | Cycle time per panel, labour per press | Falls sharply with order size; a single custom panel carries almost the full set-up |
| Finishing | Edge sealing, cutting, machining, anti-slip treatment | Added per cut and per machined edge |
| Testing and documentation | Load test, resin certificate, inspection | Per batch, not per panel — so it amortises over volume |
| Packaging | Export crating, palletising, edge protection | Per shipment |
| Freight and duty | Sea freight, insurance, destination charges, duty | Per container; depends on Incoterm |
A planning band, not a quotation: standard 38 mm isophthalic molded panels bought in full-container quantities typically sit in the low-to-mid tens of US dollars per square metre FOB, with vinyl ester, 50 mm heavy duty and fire-retardant grades above that band and orthophthalic 25 mm below it. Treat the band as a sanity check on a quote, never as a price.
The comparison that matters more than the absolute number is cost per installed square metre: panel, fixings, cutting, freight and the labour to put it down. A cheaper panel that needs twice the fixing time is not cheaper.
What Changing the Resin Costs You
| Resin | Relative material cost | Where it is the right choice |
|---|---|---|
| Orthophthalic | Lowest | Indoor, dry, temperate. Never for continuous wet or acid service. |
| Isophthalic | Baseline | General outdoor, water, moderate industrial. The default for most projects. |
| Vinyl ester | Noticeably above isophthalic | Chloride, hypochlorite, marine, chemical plant, continuous wet. The correct answer on a coast. |
| Phenolic | Highest | Fire performance and low smoke/toxicity requirements. Chosen for safety, not strength. |
The honest framing: resin is the one line where cutting cost is most likely to destroy the asset. A vinyl ester panel above a coastal jetty will outlast an isophthalic one by years. Saving a few percent on the panel to lose several years of service is not a saving.
Thickness, Span and What You Are Really Buying
Buyers often ask for a thickness when they should be asking for a span and a load. Thickness is the consequence, not the input.
| Panel | Typical use | What governs |
|---|---|---|
| 25 mm | Light pedestrian, low spans, covers | Short support spacing; not for trolleys or point loads |
| 30 mm | General pedestrian platforms | Support spacing around 1.2 to 1.5 m |
| 38 mm | Standard industrial platform and walkway | Support spacing 1.5 to 2.0 m; the most common specification |
| 50 mm | Heavy duty, vehicle or high point load | Longer spans or higher loads at the same spacing |
| 60 mm | Very heavy duty, deep span | Where steel would otherwise be required |
Two rules that decide the number: deflection governs before failure, and deflection grows with the cube of the span. Halving the support spacing cuts deflection by roughly eight times, which is usually cheaper than jumping two thicknesses. Ask for the deflection calculation, not just a thickness recommendation.
The Four Costs Buyers Forgot to Budget
- Fixings. Clips, saddle clamps and bolts are usually 5 to 12 percent of the panel value. They are quoted separately by most suppliers and are the item most often missing from a comparison.
- Cutting on site. GRP cuts with ordinary tools but generates dust and needs edge sealing. If a contractor does it, that is labour; if the factory does it, it is a cutting charge plus scrap.
- Edge sealing. Every cut edge must be sealed with resin. A quote that excludes it is incomplete, not cheaper.
- Freight per square metre. GRP is bulky and light. A part container can double the freight component per square metre. Consolidating with other items or ordering full containers is often the single biggest saving available.
A practical test of any quote: ask what is excluded. A price that lists exclusions is more trustworthy than a lower price with a blank scope.
Getting to a Real Delivered Price
The FOB number is not what the panel costs you. To compare suppliers honestly, convert every quote to the same Incoterm.
| Incoterm | Supplier covers | You cover |
|---|---|---|
| EXW | Making the goods | Everything from the factory gate: inland haulage, export clearance, freight, insurance, duty |
| FOB | Delivery to the named port and export clearance | Sea freight, insurance, destination charges, duty, inland delivery |
| CIF | Freight and marine insurance to the destination port | Destination port charges, duty, inland delivery |
| DDP | Everything to your door including duty | Nothing, but the price carries the supplier's freight and duty risk |
For UK delivery, verify three things before comparing: whether UK import duty and VAT are included, whether the destination port charges are on your account, and what the transit time actually is rather than what the sales email says.
Eight Things That Make a Quote Accurate
- Panel type (molded or pultruded) and thickness, or the load and span if you want a recommendation.
- Mesh pitch, if specified by the project.
- Resin grade, or the chemical environment and location.
- Panel size and the cutting list.
- Quantity, and whether it is a repeat order.
- Fixings: clips, clamps, bolts, and whether they are in scope.
- Documentation: load test, resin certificate, fire test, third-party inspection.
- Incoterm and destination port or postcode.
With all eight the first quote is usually right. With three of them, the quote comes back qualified and a week is lost.
Related GRP Pages
GRP Grating — Full Range
Moulded and pultruded, resin options, standards by market.
GRP Grating Manufacturer
Who makes it, from which mould, and what a factory audit pack contains.
GRP Grating Panels
Sizes, thicknesses, weight per square metre and load data.
GRP Grating Supplier
Supply terms, lead time by route, MOQ and Incoterms.
GRP Grating Suppliers
Twelve checks before you order, and the red-flag list.
GRP Platform Grating
Industrial platform decks and access structures.
GRP Channel Grating
Trench, duct and drainage covers to BS 4592.
GRP Catwalk
Elevated walkways, pipe rack access and long access routes.
GRP Structural Profiles
I, U, angle, tube and rod to BS EN 13706.
GRP Grating Price FAQ
What does GRP grating cost per square metre?
There is no single figure. It depends on type, thickness, resin, order size and Incoterm. Standard 38 mm isophthalic molded panels in full-container quantity typically sit in the low-to-mid tens of US dollars per square metre FOB, with vinyl ester and heavy duty above and thin orthophthalic below. Any number must be tied to a specification to mean anything.
Why are two quotes for the same panel so different?
Usually resin grade, glass content, whether the price includes fixings and edge sealing, and the Incoterm. A 40 percent gap almost always resolves into a specification or scope difference, not a pricing difference. Ask each supplier to itemise those four points.
Is vinyl ester worth the extra cost?
In chloride, hypochlorite, marine or continuously wet service, yes. In a dry indoor plant, no. It is the one line where saving cost is most likely to shorten the service life of the asset.
Does a thicker panel always cost more?
Per kilogram yes, but not necessarily per installed square metre. A thicker panel can allow wider support spacing, which may remove a whole row of bearers and be cheaper overall. Compare installed cost, not panel price.
How much do fixings add?
Typically 5 to 12 percent of the panel value depending on the clip type and density of fixing. They are frequently quoted separately, so check whether they are in or out of the price you are comparing.
Is a smaller order more expensive per square metre?
Yes, and mainly for two reasons: moulding set-up is spread over fewer panels, and freight is spread over fewer square metres. Filling a container properly is often the largest single saving available.
Do certificates add to the price?
They add a cost, but it is per batch rather than per panel, so it amortises. If your project or customs procedure requires a load test, resin certificate or fire documentation, say so before the quote rather than after.
Should I buy on FOB or DDP?
FOB gives you control and visibility of freight; DDP gives you a single number and less administration but hides the freight and duty inside it. Whichever you choose, convert every competing quote to the same term before comparing.
What is the biggest avoidable cost?
Cutting. Buyers order panel sizes that do not divide into the standard 1000x4000 or 1220x3660 format, then pay for cutting and scrap. A layout that uses stock panels efficiently is usually worth more than a discount.
How long does a quotation take?
With a complete specification and cutting list, a firm quote is normally same-day to two working days. Requests missing resin grade, fixings scope or Incoterm come back with questions and take longer.
Request a Priced Quote
Send the panel type or the load and span, the resin or the environment, the cutting list and the destination. You will get a priced quote with fixings and edge sealing clearly marked as included or excluded.
Request Quote → See Supply Terms
NANTONG ZEALL NEW MATERIALS CO., LTD. · GRP Grating Manufacturer · ISO 9001 certified
