📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout

FRP Grating Specifications

38 mm Molded FRP/GRP Grating, 38 x 38 mm Mesh

General-purpose 38 mm square-mesh molded FRP grating, the balanced walkway panel for platforms, process plants and wastewater decks.

Technical specifications

TypeMolded FRP/GRP grating
Mesh opening38 x 38 mm
Thickness38 mm
Standard panel size1220 x 3660 mm (4 x 12 ft), cut to size
Open area68%
Unit weight19.5 kg/m²
Resin systemsIsophthalic polyester; vinyl ester; phenolic on request
Surface optionsConcave (meniscus) top, quartz-grit anti-slip, smooth

Load and span guidance

Support spanAllowable UDL (kN/m²)
600 mm25 kN/m²
900 mm12 kN/m²
1200 mm6.5 kN/m²

Deflection basis: L/200, simply supported single span. Indicative allowable uniform load for preliminary sizing, deflection L/200, simply supported single span. Point, concentrated, cantilever and line-load cases are not covered by this table and must be checked separately. Load duration, temperature, chemical attack and impact all reduce the capacity a table figure can carry.

Typical applications

  • Walkways and platforms
  • Chemical and process plants
  • Water and wastewater
  • Trench and drain covers

Sizing, installation and procurement

The 38 x 38 mm balanced mesh

The 38 x 38 mm square mesh is the default balanced opening: it drains water, oil and swarf while staying closed enough for safety footwear. Where small tools or heels must not drop through, move to a finer mesh instead of narrowing this one.

38 mm depth, load and span

The 38 mm depth buys stiffness and load capacity for wider spans and heavier traffic. The allowable uniform load below is read at the real support span against L/200; adding a bearer usually costs less than increasing panel depth.

Resins and finishes for a general deck

Isophthalic polyester for general outdoor and moist service; vinyl ester for acids, alkalis and chlorides; phenolic on request for fire-critical areas. Concave meniscus, quartz-grit and smooth finishes cover wet routes, ramps and wash-down rooms.

Cutting and fixing the 38 mm panel

Standard panel 1220 x 3660 mm, cut to drawing with deburred edges. M, C, L or Z clips with stainless bolts; corner through-bolting on exposed or trafficked decks. Minimum order 10 m²; lead time 12–36 working days.

Manufactured in our own plant in Nantong under an ISO 9001 quality management system. An ASTM F3059 test report is available on request. Certificates and test reports are provided for the supplied product on request.

Technical data sheets (PDF)

Data sheets carry no certificate numbers; full test reports are sent on request.

Related resources

FAQ

Which thickness should a general walkway use?

What load can a 38 mm panel carry at 900 mm span?

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]