> >>
📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Retaining Wall · Anchor Profile · Composite Fender & Strut

GRP Retaining Wall Profile

FRP/GRP composite retaining-wall profiles, anchor sections, struts and fender members for embankments, excavation support, quay walls and slope stabilization; corrosion-proof and non-conductive.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP composite retaining-wall profiles, anchor sections, struts and fender members for embankments, excavation support, quay walls and slope stabilization; corrosion-proof and non-conductive.

Overview

{p["overview_title"]}

Corrosion-proof reinforcement

Composite anchors, struts and channels resist soil moisture, salt and aggressive groundwater that would corrode steel reinforcement or I-sections.

Non-conductive and durable

The sections do not conduct electricity and resist chemical attack, suiting utility corridors, waterfront and corrosive ground conditions.

Custom sections

Channels, angles, rods and box sections are pultruded or pullwound to length, with end fittings and bearing details to the design.

Technical Specifications

Retaining-Wall Profile Specifications

Wall anchors and fender members must carry tension, bending and soil loads in often corrosive ground. Typical section and resin options are below.

ParameterStandard RangeNotes
Section typeChannel / angle / rod / boxCustom profile
Sizemade to drawingPer structural calc
Lengthcut to required spanJoined with couplers
ResinIsophthalic / Vinyl esterVinyl ester for aggressive ground
FinishSmooth / grit edgeUV-stable where exposed
End fittingsBearing plate / couplerPer connection detail

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

Composite Profile vs Steel Section for Wall Works

Retaining wall members sit in wet, often corrosive ground. The table compares composite sections with steel on corrosion, conductivity and maintenance.

PropertyFRP/GRP ProfileSteel Section
CorrosionResists moisture, salts, chemicalsRusts; coating required
ConductivityNon-conductiveConductive
WeightLight, easy handlingHeavy
MaintenanceLow, no paintingProtective coating repair

Profiles connect to structural framing and pultruded sections.

Applications

Where Wall Profiles Are Used

Embankment & slope: Anchors and struts stabilize cut slopes, retaining embankments and roadside earthworks.

Quay & seawall: Fender channels and wall members resist saltwater and splash in port and flood defense works.

Excavation support: Composite struts and bracing sections serve utility pits and temporary or permanent excavation support.

Selection & Installation

Wall Profile Ordering Process

  1. Provide the design load, ground condition, required section and connection detail.
  2. Select resin system and finish for exposed or corrosive service.
  3. We confirm ply/section schedule, end fittings and length; supply cut-to-member lengths.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your GRP Retaining Wall Profile Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

GRP Retaining Wall Profile FAQ

What are FRP retaining wall profiles?
Composite anchor rods, struts, fender channels and wall sections used in embankment, excavation, quay and slope stabilization works.
Why use composite instead of steel in walls?
Composite resists soil moisture, salt and aggressive groundwater without corrosion, is non-conductive and weighs less than steel sections.
Can you supply custom sections and end fittings?
Yes. Channels, angles, rods and box sections are made to drawing with bearing plates, couplers and end details.
Which resin for aggressive ground?
Vinyl ester grades suit aggressive groundwater and waterfront service; isophthalic polyester for general earthworks.
Do you supply grating and structural profiles too?
Yes. We supply molded and pultruded FRP/GRP grating, handrail systems, structural and pultruded composite profiles.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]