> >>
📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Pullwinding · Rod · Tube · Composite Structural Section

GRP Pullwinding Profiles

FRP/GRP pullwinding profiles combine pultrusion and filament winding for rods, tubes and structural sections with high circumferential strength; used in poles, pipes, trusses and marine members.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP pullwinding profiles combine pultrusion and filament winding for rods, tubes and structural sections with high circumferential strength; used in poles, pipes, trusses and marine members.

Overview

{p["overview_title"]}

Hybrid process

Continuous rovings are pulled through a die while circumferential winder strands lay down hoop reinforcement, combining axial pull strength with ring stiffness.

Where it fits

Round tubes, poles and members that must resist internal pressure, bending and hoop loads better than straight pultrusion alone.

Material system

E-glass reinforcement with polyester, vinyl ester or phenolic resin per chemical, fire or outdoor exposure; outer gel coat available for UV.

Technical Specifications

Pullwinding Composite Specifications

Pullwinding produces round and near-round sections for poles, tubes and truss members. Typical diameter, wall and resin options are below.

ParameterStandard RangeNotes
Section shapeRound tube / rod / tapered poleNear-round sections
Diameter25 – 300 mmMade to drawing
Wall thickness3 – 20 mmHoop + axial plies
ResinPolyester / Vinyl ester / PhenolicVinyl ester for chemicals
FinishSmooth gel coat / texturedUV-stable outer layer
Lengthcontinuous to cutJoined with couplers

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

Pullwinding vs Pultrusion vs Filament Winding

The three composite processes suit different loads and shapes. The comparison helps select the right route for your rod, tube or section.

MethodPullwindingPultrusionFilament Winding
Axial strengthHighHighModerate
Hoop/ring strengthHighLowHigh
Constant sectionRound/near-roundAny constant profileOpen/closed vessels
Best fitPoles, tubes, truss rodsBeams, angles, channelsPipes, tanks, vessels

Alongside pullwinding we supply pultruded profiles and structural sections.

Applications

Pullwound Profiles in Service

Poles & masts: Wound tubes carry lighting, signage and communication poles with high bending and ring strength.

Pipe & process: Composite tubes route corrosive fluids where steel would corrode; vinyl ester grades for aggressive media.

Truss & marine members: Light wound rods form truss chords, spars and rail members resistant to salt and moisture.

Selection & Installation

Pullwinding Selection Guide

  1. Define section, length, load (bending, pressure, wind) and chemical exposure.
  2. Choose resin system and outer finish for outdoor or chemical service.
  3. Send drawings for an engineered section with ply schedule and connection detail.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your GRP Pullwinding Profiles Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

GRP Pullwinding Profiles FAQ

What is pullwinding?
A hybrid composite process that pulls rovings through a die while winding hoop strands, producing rods and tubes with both axial and circumferential strength.
How is pullwinding different from pultrusion?
Pultrusion gives axial strength in any constant profile; pullwinding adds hoop reinforcement, suiting round poles, tubes and pressure members.
What products are pullwound?
Composite poles, tubular sections, truss rods, pipes and marine spars.
Which resin should I specify?
Polyester for general outdoor use, vinyl ester for chemicals and wastewater, phenolic where fire rating is required.
Do you supply pultruded grating and profiles too?
Yes. We manufacture molded and pultruded FRP/GRP grating, profiles, handrail systems and custom composite sections.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]