GRP Pole
FRP/GRP composite poles and masts for lighting, signage, communication and utility support; non-conductive, corrosion-proof, lightweight and available as straight or telescopic sections.
FRP/GRP composite poles and masts for lighting, signage, communication and utility support; non-conductive, corrosion-proof, lightweight and available as straight or telescopic sections.
{p["overview_title"]}
Non-conductive support
Composite masts carry electrical, lighting and telecom equipment without conducting current, improving safety around substations and cable zones.
Corrosion-proof outdoors
The pole resists salt spray, moisture and UV ageing, outlasting steel in coastal, chemical and wet service.
Straight and telescopic
Tapered one-piece poles and joined telescopic sections are produced to height, with arm, bracket and base fitting options.
FRP Pole Specifications
Poles must carry wind, fixture and bracket loads in outdoor or corrosive conditions. Typical section and resin options are below.
| Parameter | Standard Range | Notes |
|---|---|---|
| Pole type | Tapered / telescopic / straight | Custom height |
| Height | made to drawing | Per wind load |
| Diameter | 60 – 200 mm base | Tapered to top |
| Resin | Polyester / Vinyl ester | UV-stable outer gel coat |
| Fittings | Arm, bracket, base flange | Per application |
| Finish | Smooth gel coat | Colour matched |
Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.
Composite Pole vs Steel vs Aluminium Pole
Outdoor poles face wind, corrosion and electrical safety. The table compares composite poles with steel and aluminium on the deciding properties.
| Property | FRP/GRP Pole | Steel Pole | Aluminium Pole |
|---|---|---|---|
| Corrosion | Resists salt, moisture, UV | Rusts; recoat | Tarnishes |
| Conductivity | Non-conductive | Conductive | Conductive |
| Weight | Light | Heavy | Light |
| Maintenance | Low, no painting | Periodic recoat | Clean/anodize |
Poles join handrail posts and structural sections in composite framing.
Where Composite Poles Are Used
Street & lighting: Tapered poles carry road and lot lighting with non-conductive, rust-free support.
Signage & telecom: Masts support signs, cameras, sensors and communication equipment in industrial and utility corridors.
Coastal & corrosive: Salt-resistant poles replace steel that corrodes in marine, chemical and wet environments.
Pole Selection & Ordering
- State purpose, required height, fixture/arm weight and wind or site condition.
- Choose one-piece tapered or telescopic section and the required fittings.
- We confirm section, wall thickness and base detail; supply matched poles and accessories.
See the installation guide and grating clips for fixing.
Related Products and Guides
- FRP Handrail — posts and rails
- FRP Structural Profiles — framing sections
- FRP Pultruded Profiles — channel, angle, bar
- Pultruded FRP Grating — heavy-duty sections
Request Your GRP Pole Quote
Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
GRP Pole FAQ
Product and factory gallery






Technical Documentation (PDF)
Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.
- frp-grp-grating-technical-data-sheet.pdf (5 KB, PDF)
- frp-grating-load-table.pdf (4 KB, PDF)
- installation-maintenance-manual.pdf (81 KB, PDF)
- installation-node-details.pdf (81 KB, PDF)
Download Document
Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!
Thank You!
Your request has been received successfully.
Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!
If you need urgent assistance, please email: [email protected]
