> >>
📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Helipad · Drone Landing Pad · Composite Platform Deck

GRP Drone Landing Platform

FRP/GRP composite landing platforms and helipad grating decks for drones, helicopters and offshore, rooftop or wind-site operations; corrosion-proof, anti-slip, lightweight and fast to install.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP composite landing platforms and helipad grating decks for drones, helicopters and offshore, rooftop or wind-site operations; corrosion-proof, anti-slip, lightweight and fast to install.

Overview

{p["overview_title"]}

Modular deck surface

Molded or pultruded FRP/GRP panels form a safe, drained and anti-slip landing surface that bolts onto steel or composite framing.

Corrosion-proof by nature

Composite decks resist salt spray, fuel spills and wet/dry cycles that corrode steel plating in offshore and marine service.

Light and quick to mount

Low self-weight eases lifting onto vessels, towers and rooftops; panels are cut on site and fixed with matched clips or frames.

Technical Specifications

Landing Platform Deck Specifications

Helipad and drone decks must grip under rotor wash, drain quickly and resist corrosion. Standard panel depths and surface options are below.

ParameterStandard RangeNotes
Panel depth25 / 30 / 38 / 50 mmDeeper for heavy duty
SurfaceGritted / concave / covered solidGrip in wet rotor wash
Panel sizeup to 1000×2000 mmModular cut to deck
ResinIsophthalic / Vinyl esterVinyl ester for splash zones
FramingSteel or FRP support frameMatched clip fixing
LoadPedestrian to platform trafficPer UDL/impact calc

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

Composite Landing Deck vs Steel Deck Plate

Landing decks face salt, fuel and rotor-wash loading. The table compares composite grating decking with steel plate on the factors that decide the build.

PropertyFRP/GRP DeckSteel Plate/Grating
CorrosionImmune to salt spray and spillsRusts; recoat required
WeightLight, easy liftingHeavy
Anti-slipGritted/concave safe when wetCan be slippery when wet
MaintenanceNo paintingPeriodic recoating
Theft valueZero scrap valueHigh scrap theft risk

Decks pair with FRP handrail systems and platform grating for access and edge protection.

Applications

Where Composite Landing Platforms Are Used

Offshore & marine: Composite helidecks and drone pads serve vessels, rigs and walk-to-work platforms in splash and salt-air zones.

Wind & rooftop: Light decks mount on turbine towers, buildings and remote sites where steel weight and corrosion are limiting.

Emergency landing zones: Modular panels form rooftop or site heliport surfaces that drain and grip under rotor wash.

Selection & Installation

Platform Deck Selection & Installation

  1. Define landing craft, deck size, load and environment (salt, fuel, wind).
  2. Select panel depth and anti-slip surface; confirm framing spacing and support.
  3. Cut panels to deck, bed flush and fix with matched clips or frames; add edge handrail as required.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your GRP Drone Landing Platform Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

GRP Drone Landing Platform FAQ

What is an FRP drone landing platform?
A modular composite grating deck built as a drone or helicopter landing pad, anti-slip and corrosion-proof for offshore, rooftop and wind-site use.
Can composite decks carry helicopter loads?
Heavy-duty 38/50 mm pultruded decks serve platform and helicopter access zones; each deck is checked against the stated landing load and span.
Are the surfaces non-slip?
Yes. Gritted or concave anti-slip tops maintain grip in wet, windy rotor-wash conditions.
How are panels fixed?
Panels bolt onto steel or FRP framing using matched clips or edge frames; cut edges are sealed and supported.
Do you supply offshore access grating and handrail too?
Yes. We supply molded and pultruded FRP/GRP grating, platforms, handrail systems and custom composite decks for offshore and industry.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]