> >>
📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
FRP/GRP Cover Plate · Solid-Top & Gritted · Load-Rated

GRP Cover Plate Grating

FRP/GRP cover plate grating — solid-top and gritted composite plates for walkways, access pits, drains and trench covers; corrosion-proof, non-conductive, anti-slip, factory-direct.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP cover plate grating — solid-top and gritted composite plates for walkways, access pits, drains and trench covers; corrosion-proof, non-conductive, anti-slip, factory-direct.

Overview

{p["overview_title"]}

Solid-top cover plates

Smooth or gritted solid panels seal the floor against splashes, debris and odour while giving a safe walking surface over pits, drains and cable runs.

Gritted / anti-slip surface

Grit-top or concave profiles maintain grip in wet, oily or coastal zones where smooth metal would slip.

Load-rated panels

Pedestrian to forklift zones in 25/30/38/50 mm; deeper pultruded sections for vehicle traffic, confirmed against your span and wheel load.

Technical Specifications

FRP Cover Plate Grating Technical Specifications & Sizes

Cover plates keep walkways and traffic decks safe while sealing or draining the opening below. The table shows standard sizes and load classes we manufacture to, with matching frames.

ParameterStandard RangeNotes
Panel thickness25 / 30 / 38 / 50 / 75 mmDeeper for vehicle traffic
Panel sizeup to 1000×2000 mmCut to opening
SurfaceSmooth / gritted / concave / covered solidGrit for wet zones
ResinIsophthalic / Vinyl ester / PhenolicVinyl ester for chemicals
Mesh / slot38×38 / 19×19 / solid-topSolid top seals floor
Typical loadA pedestrian – D forklift/vehicularPer EN/ISO rating

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

FRP/GRP Cover Plate vs Steel vs Aluminium Plate

Cover plates face corrosion, loading and (often) theft. The table compares composite plate against traditional steel and aluminium on the properties that decide the purchase.

PropertyFRP/GRP PlateSteel PlateAluminium Plate
CorrosionImmune to rust and acidsRusts, recoat neededTarnishes in coastal/acid air
WeightLight, one-person liftHeavyLight but soft
ConductivityNon-conductiveConductiveConductive
Heat transferLowConducts heatConducts heat
Scrap theft valueZeroHighModerate

Composite plates remove both rust maintenance and scrap-theft risk — see the cost comparison.

Applications

Where FRP Cover Plates Are Used

Industrial walkways: Solid-top plates cover service pits and cable runs in plants, refineries and electroplating shops.

Drainage & channels: Slotted or solid covers over floor drains and coastal channels resist H₂S and salt spray.

Food & beverage: Non-corrosive, wash-down-safe plates carry no scrap-theft risk.

Marine & offshore: Salt-resistant composite plates replace steel decks that rust and invite theft.

Selection & Installation

Cover Plate Selection & Installation Guide

  1. Measure the clear opening and the traffic: pedestrian, pallet truck or forklift.
  2. Select surface: smooth for clean rooms, gritted for wet or oily floors.
  3. Choose resin: isophthalic for general use, vinyl ester for chemical and wastewater channels.
  4. Confirm bearing on all sides; bed flush to avoid trip hazards; use clips or frames for fixing.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your GRP Cover Plate Grating Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

GRP Cover Plate Grating FAQ

What is FRP cover plate grating?
Solid or gritted fiberglass composite plate used to cover walkways, pits, drains and channels while providing a safe, load-rated surface.
Can cover plates carry forklift loads?
Yes. 38/50 mm heavy-duty pultruded plates suit forklift and yard traffic; 25/30 mm panels are for pedestrian drainage and walkways.
Are they anti-slip?
Yes. Gritted or concave anti-slip tops are available for wet, oily and coastal areas.
Do you make custom sizes?
Yes. Plates are cut to your opening and load, with matching frames and hinge/lock options.
How do FRP plates compare with steel?
They do not rust or corrode, are non-conductive and carry zero scrap value; they are lighter to lift and install.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]