FRP Hand Lay-Up Products
Custom hand-laid FRP/GRP composite products — housings, covers, panels, profiles and formed parts — laid up by hand for low-volume, complex or large-format composite components.
Custom hand-laid FRP/GRP composite products — housings, covers, panels, profiles and formed parts — laid up by hand for low-volume, complex or large-format composite components.
{p["overview_title"]}
Process
Fabric plies are hand positioned and wet-out with resin in an open mould, allowing complex shapes, local reinforcement and large panels without high press tooling.
Best fit
Prototypes, spare parts, custom housings, decorative or structural panels, and components where pultrusion or moulding tooling is not justified.
Material system
E-glass/C-glass fabrics with isophthalic, vinyl ester or phenolic resin per chemical, fire or UV requirements.
Hand Lay-Up Product Specifications
Hand lay-up suits non-constant-section, low-volume composite parts. The table shows typical reinforcement, resin and finish options.
| Parameter | Standard Range | Notes |
|---|---|---|
| Part size | up to large panels / enclosures | Per mould |
| Reinforcement | Woven fabric, mat, roving | Local extra plies at loads |
| Resin | Isophthalic / Vinyl ester / Phenolic | Vinyl ester for chemicals |
| Finish | Gel coat / painted / textured | UV-stable outer layer |
| Volume | Low to medium batch | Prototypes to repeat parts |
Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.
Hand Lay-Up vs Pultrusion vs Compression Moulding
Each composite process fits a different part shape and volume. The comparison helps choose the most economical route for your component.
| Method | Hand Lay-Up | Pultrusion | Compression Moulding |
|---|---|---|---|
| Shape freedom | High, complex/large | Constant cross-section | Near-net shape, tooled |
| Tooling cost | Low | Profile die | Mould set |
| Best volume | Prototype / low batch | Continuous profiles | Medium-high batch |
| Labour intensity | High | Low | Low |
Alongside hand lay-up we supply pultruded profiles and moulded covers and panels.
Hand Lay-Up Products in Service
Custom housings & covers: Equipment enclosures, access covers and protective shrouds formed to drawing.
Panels & cladding: Composite wall panels, duct sections and decorative/structural sheets.
Spare & replacement parts: Legacy composite components reproduced without dedicated tooling.
Custom Hand Lay-Up Ordering Process
- Share drawing, function, environment and required resin/finish.
- We propose lay-up schedule, reinforcement placement and surface finish.
- Produce sample, approve fit and finish, then repeat batch.
See the installation guide and grating clips for fixing.
Related Products and Guides
- FRP Pultruded Profiles — constant-section members
- FRP Covers and Panels — covers and sheets
- Custom FRP Grating — cut-to-size composite
- FRP Structural Profiles — framing sections
Request Your FRP Hand Lay-Up Products Quote
Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
FRP Hand Lay-Up Products FAQ
Product and factory gallery






Technical Documentation (PDF)
Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.
- frp-grp-grating-technical-data-sheet.pdf (5 KB, PDF)
- frp-grating-load-table.pdf (4 KB, PDF)
- installation-maintenance-manual.pdf (81 KB, PDF)
- installation-node-details.pdf (81 KB, PDF)
Download Document
Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!
Thank You!
Your request has been received successfully.
Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!
If you need urgent assistance, please email: [email protected]
