FRP Drone Landing Platform
FRP/GRP composite landing platforms and helipad grating decks for drones, helicopters and offshore, rooftop or wind-site operations; corrosion-proof, anti-slip, lightweight and fast to install.
FRP/GRP composite landing platforms and helipad grating decks for drones, helicopters and offshore, rooftop or wind-site operations; corrosion-proof, anti-slip, lightweight and fast to install.
{p["overview_title"]}
Modular deck surface
Molded or pultruded FRP/GRP panels form a safe, drained and anti-slip landing surface that bolts onto steel or composite framing.
Corrosion-proof by nature
Composite decks resist salt spray, fuel spills and wet/dry cycles that corrode steel plating in offshore and marine service.
Light and quick to mount
Low self-weight eases lifting onto vessels, towers and rooftops; panels are cut on site and fixed with matched clips or frames.
Landing Platform Deck Specifications
Helipad and drone decks must grip under rotor wash, drain quickly and resist corrosion. Standard panel depths and surface options are below.
| Parameter | Standard Range | Notes |
|---|---|---|
| Panel depth | 25 / 30 / 38 / 50 mm | Deeper for heavy duty |
| Surface | Gritted / concave / covered solid | Grip in wet rotor wash |
| Panel size | up to 1000×2000 mm | Modular cut to deck |
| Resin | Isophthalic / Vinyl ester | Vinyl ester for splash zones |
| Framing | Steel or FRP support frame | Matched clip fixing |
| Load | Pedestrian to platform traffic | Per UDL/impact calc |
Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.
Composite Landing Deck vs Steel Deck Plate
Landing decks face salt, fuel and rotor-wash loading. The table compares composite grating decking with steel plate on the factors that decide the build.
| Property | FRP/GRP Deck | Steel Plate/Grating |
|---|---|---|
| Corrosion | Immune to salt spray and spills | Rusts; recoat required |
| Weight | Light, easy lifting | Heavy |
| Anti-slip | Gritted/concave safe when wet | Can be slippery when wet |
| Maintenance | No painting | Periodic recoating |
| Theft value | Zero scrap value | High scrap theft risk |
Decks pair with FRP handrail systems and platform grating for access and edge protection.
Where Composite Landing Platforms Are Used
Offshore & marine: Composite helidecks and drone pads serve vessels, rigs and walk-to-work platforms in splash and salt-air zones.
Wind & rooftop: Light decks mount on turbine towers, buildings and remote sites where steel weight and corrosion are limiting.
Emergency landing zones: Modular panels form rooftop or site heliport surfaces that drain and grip under rotor wash.
Platform Deck Selection & Installation
- Define landing craft, deck size, load and environment (salt, fuel, wind).
- Select panel depth and anti-slip surface; confirm framing spacing and support.
- Cut panels to deck, bed flush and fix with matched clips or frames; add edge handrail as required.
See the installation guide and grating clips for fixing.
Related Products and Guides
- FRP Platform Grating — heavy-duty deck surfaces
- Heavy-Duty GRP Grating — high-load platforms
- FRP Handrail — edge protection
- Anti-Slip FRP Grating — gritted surfaces
Request Your FRP Drone Landing Platform Quote
Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
FRP Drone Landing Platform FAQ
Product and factory gallery






Technical Documentation (PDF)
Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.
- frp-grp-grating-technical-data-sheet.pdf (5 KB, PDF)
- frp-grating-load-table.pdf (4 KB, PDF)
- installation-maintenance-manual.pdf (81 KB, PDF)
- installation-node-details.pdf (81 KB, PDF)
Download Document
Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!
Thank You!
Your request has been received successfully.
Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!
If you need urgent assistance, please email: [email protected]
