FRP Cover Plate Grating
FRP/GRP cover plate grating — solid-top and gritted composite plates for walkways, access pits, drains and trench covers; corrosion-proof, non-conductive, anti-slip, factory-direct.
FRP/GRP cover plate grating — solid-top and gritted composite plates for walkways, access pits, drains and trench covers; corrosion-proof, non-conductive, anti-slip, factory-direct.
{p["overview_title"]}
Solid-top cover plates
Smooth or gritted solid panels seal the floor against splashes, debris and odour while giving a safe walking surface over pits, drains and cable runs.
Gritted / anti-slip surface
Grit-top or concave profiles maintain grip in wet, oily or coastal zones where smooth metal would slip.
Load-rated panels
Pedestrian to forklift zones in 25/30/38/50 mm; deeper pultruded sections for vehicle traffic, confirmed against your span and wheel load.
FRP Cover Plate Grating Technical Specifications & Sizes
Cover plates keep walkways and traffic decks safe while sealing or draining the opening below. The table shows standard sizes and load classes we manufacture to, with matching frames.
| Parameter | Standard Range | Notes |
|---|---|---|
| Panel thickness | 25 / 30 / 38 / 50 / 75 mm | Deeper for vehicle traffic |
| Panel size | up to 1000×2000 mm | Cut to opening |
| Surface | Smooth / gritted / concave / covered solid | Grit for wet zones |
| Resin | Isophthalic / Vinyl ester / Phenolic | Vinyl ester for chemicals |
| Mesh / slot | 38×38 / 19×19 / solid-top | Solid top seals floor |
| Typical load | A pedestrian – D forklift/vehicular | Per EN/ISO rating |
Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.
FRP/GRP Cover Plate vs Steel vs Aluminium Plate
Cover plates face corrosion, loading and (often) theft. The table compares composite plate against traditional steel and aluminium on the properties that decide the purchase.
| Property | FRP/GRP Plate | Steel Plate | Aluminium Plate |
|---|---|---|---|
| Corrosion | Immune to rust and acids | Rusts, recoat needed | Tarnishes in coastal/acid air |
| Weight | Light, one-person lift | Heavy | Light but soft |
| Conductivity | Non-conductive | Conductive | Conductive |
| Heat transfer | Low | Conducts heat | Conducts heat |
| Scrap theft value | Zero | High | Moderate |
Composite plates remove both rust maintenance and scrap-theft risk — see the cost comparison.
Where FRP Cover Plates Are Used
Industrial walkways: Solid-top plates cover service pits and cable runs in plants, refineries and electroplating shops.
Drainage & channels: Slotted or solid covers over floor drains and coastal channels resist H₂S and salt spray.
Food & beverage: Non-corrosive, wash-down-safe plates carry no scrap-theft risk.
Marine & offshore: Salt-resistant composite plates replace steel decks that rust and invite theft.
Cover Plate Selection & Installation Guide
- Measure the clear opening and the traffic: pedestrian, pallet truck or forklift.
- Select surface: smooth for clean rooms, gritted for wet or oily floors.
- Choose resin: isophthalic for general use, vinyl ester for chemical and wastewater channels.
- Confirm bearing on all sides; bed flush to avoid trip hazards; use clips or frames for fixing.
See the installation guide and grating clips for fixing.
Related Products and Guides
- FRP Covers and Panels — trench and drainage covers
- Covered Grating — solid-top panel over cable trench
- FRP Trench Cover Grating — drainage and channel covers
- Anti-Slip FRP Grating — gritted and concave surfaces
- FRP Grating Clips — frame fixing hardware
Request Your FRP Cover Plate Grating Quote
Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China
FRP Cover Plate Grating FAQ
Product and factory gallery






Technical Documentation (PDF)
Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.
- frp-grp-grating-technical-data-sheet.pdf (5 KB, PDF)
- frp-grating-load-table.pdf (4 KB, PDF)
- installation-maintenance-manual.pdf (81 KB, PDF)
- installation-node-details.pdf (81 KB, PDF)
Download Document
Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!
Thank You!
Your request has been received successfully.
Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!
If you need urgent assistance, please email: [email protected]
