> >>
📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
FRP/GRP Cable Tray · Ladder · Perforated · Solid Base

GRP Cable Tray

FRP/GRP cable trays and tray ladders for power, control and data cable routing in corrosive, wet or coastal environments; non-conductive, corrosion-proof, custom fabricated.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP cable trays and tray ladders for power, control and data cable routing in corrosive, wet or coastal environments; non-conductive, corrosion-proof, custom fabricated.

Overview

{p["overview_title"]}

Cable management

Ladder, perforated and solid-bottom FRP trays carry cable runs above floors, in trenches and on platforms without rusting.

Corrosion resistance

Vinyl ester or isophthalic bodies resist acids, alkalis, H₂S and salt spray in chemical, wastewater and marine service.

Non-conductive and light

Safer around electrical equipment; easier to lift and install than steel or aluminium trays.

Technical Specifications

FRP Cable Tray Technical Specifications

Composite trays route cables in corrosive or wet service where galvanized steel would rust. Standard widths, depths and resin systems are below.

ParameterStandard RangeNotes
Tray width100 – 600 mmCustom sizes
Depth50 – 150 mmLadder / perforated / solid base
Lengthup to 3000 mmJoined with FRP couplers
ResinIsophthalic / Vinyl esterVinyl ester for chemicals
LoadCable weight + short-span accessPer span calculation
SurfaceSmooth / gritted edgeEdge grip for maintenance

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

FRP/GRP Tray vs Galvanized Steel vs Aluminium

Cable trays sit in wet, corrosive or coastal zones. The table compares composite tray against galvanized steel and aluminium on corrosion, conductivity and maintenance.

PropertyFRP/GRP TrayGalvanized SteelAluminium
CorrosionImmune to acids, H₂S, saltRusts in wet/chemical airTarnishes in coastal zones
ConductivityNon-conductiveConductiveConductive
WeightLightHeavyLight
MaintenanceNo paintingRe-coat / rust repairAnodize or clean
Heat transferLowConducts heatConducts heat

Trays pair with FRP structural profiles for supports and framing.

Applications

Where FRP Cable Trays Are Used

Chemical & petrochemical: Corrosion-proof trays route instrument and power cables through corrosive units.

Wastewater & desalination: Non-rusting trays resist H₂S, brine and wash-down.

Marine & offshore: Salt-resistant trays in splash and cable deck zones.

Food & beverage: Wash-down-safe, non-corrosive cable supports.

Selection & Installation

Cable Tray Selection & Installation

  1. Confirm cable types, total weight and required span between supports.
  2. Choose base type: ladder for ventilation, perforated for containment, solid bottom for protection.
  3. Select resin by chemical exposure; specify covers and edge grip where maintenance access applies.
  4. Install on FRP or steel supports; use matched couplers and bonds.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your GRP Cable Tray Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

GRP Cable Tray FAQ

What is FRP cable tray?
A fiberglass composite tray that routes power, control and data cables without rusting or conducting electricity.
Is FRP tray better than galvanized steel?
In corrosive, wet or coastal service FRP resists acids and salt spray and needs no recoating; steel may suit dry, heavy-load runs.
Are FRP trays non-conductive?
Yes, the composite body is non-conductive, which improves safety near electrical equipment.
Do you make custom tray sizes and covers?
Yes. Width, depth, length, ladder/perforated/solid base and matching covers are fabricated to your cable schedule.
What environments are FRP trays for?
Chemical plants, wastewater and desalination, marine/offshore, food processing and coastal cable runs.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]