📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
Filament Winding · Composite Pipe · Tube & Pressure Vessel

FRP Wound Pipe

FRP/GRP filament-wound pipes and tubes for chemical, wastewater, drainage and ventilation lines; hoop-reinforced, corrosion-proof and produced to diameter and pressure rating.

ISO 9001 Certified
Direct FRP Grating Master Factory
Exported to 45+ Countries
ISO 9001
Quality Management
45+ Countries
Global Export Network
20+ Years
Manufacturing Experience
Custom OEM/ODM
Engineering Support

FRP/GRP filament-wound pipes and tubes for chemical, wastewater, drainage and ventilation lines; hoop-reinforced, corrosion-proof and produced to diameter and pressure rating.

Overview

{p["overview_title"]}

Hoop reinforcement

Filament winding lays down circumferential reinforcement that resists internal pressure and ring loads better than straight pultrusion alone.

Corrosion-proof lines

Composite pipe resists acids, alkalis, brine and H₂S that corrode steel or concrete pipe in chemical and wastewater service.

Sizes and joints

Tubes are wound to diameter and length, joined with composite couplers, flanges or bonded sockets per the line design.

Technical Specifications

Wound Pipe Specifications

Wound pipes carry fluid pressure and ring loads in corrosive service. Typical diameter, wall and resin options are below.

ParameterStandard RangeNotes
Diameter50 – 600 mmMade to drawing
Wall thickness3 – 20 mmHoop + axial plies
Pressureper design ratingPer medium/head
ResinPolyester / Vinyl ester / EpoxyVinyl ester for chemicals
JointCoupler / flange / socketPer line detail
FinishSmooth inner/outerResistant liner

Supplied with COA and load/property test reports; send your dimensions and load for a matched specification.

Material Comparison

Composite Wound Pipe vs Steel vs PVC Pipe

Pipework faces corrosion, pressure and chemical attack. The table compares wound composite pipe with steel and PVC on the deciding properties.

PropertyFRP/GRP Wound PipeSteel PipePVC Pipe
CorrosionResists acids, brine, H₂SRusts; liner neededResistant
PressureHigh hoop strengthHighModerate
WeightLightHeavyLight
TemperatureResin-dependentHighLimited

Wound members complement pullwound profiles and pultruded sections.

Applications

Where Wound Composite Pipe Is Used

Chemical process: Corrosion-resistant wound lines route acids, alkalis and process fluids through units.

Wastewater & drainage: Composite pipes resist H₂S, brine and wash-down in treatment and drainage networks.

Ventilation & cooling: Wound ducts carry exhaust air and cooling water in industrial and marine service.

Selection & Installation

Wound Pipe Selection

  1. State medium, concentration, pressure/head, diameter and temperature.
  2. Select resin system and liner suited to the chemical exposure.
  3. Confirm joint type, length and support spacing; supply cut-to-line pipes and fittings.

See the installation guide and grating clips for fixing.

Related Pages

Related Products and Guides

Get Started

Request Your FRP Wound Pipe Quote

Email [email protected] · Tel/WhatsApp +86-513-6681-9918 · Nantong, Jiangsu, China

FAQ

FRP Wound Pipe FAQ

What is an FRP wound pipe?
A filament-wound fiberglass composite pipe with circumferential reinforcement, used for pressure, drainage and ventilation lines in corrosive service.
How does winding differ from pultrusion?
Winding adds hoop strength for pressure and ring loads; pultrusion gives axial strength in constant profiles. Pullwinding combines both.
Which resin for chemical lines?
Vinyl ester grades suit aggressive acids and wastewater; polyester for general drainage; epoxy for selected pressure service.
Can you supply fittings and joints?
Yes. Couplers, flanges, sockets and matched fittings are supplied with the pipe run per the design.
Do you supply profiles and grating too?
Yes. We supply FRP/GRP grating, profiles, handrail systems and custom composite members.

Technical Documentation (PDF)

Download the FRP/GRP technical documents relevant to this page. Figures are indicative — confirm against a stamped project calculation.

Request a quotation or ask our engineers

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]