ZeAll FRP/GRP gratings clips, G-clips Grating fasteners, fasteners,gratings fasteners, steel gratings clips, gratings clips, metal grating clips, molded gratings clips,pultruded grating clips, fiberglass grating clips, clips, C type clips, G type clips, L type clips, M type clips, SUS316 clips, SUS304 clips, gratings clips, fiberglass gratings clips.

M Clips

M clips or saddle clips clamp 2 fiberglass grating load bars to the support. This provides excellent holding capability and because of this, are recommended for stair treads and most molded and pultruded fiberglass gratings

G Clips

When drilling the support member has to be avoided, G clips offer the solution. The lower jaw of the clip grips the support flange when the bolt is torqued. A heavier top clip then completes the assembly to carry the loads. Providing excellent bidirectional holding capability for molded square mesh fiberglass grating

C Clips

C clips were specifically designed to tie two panels of molded fiberglass gratings together to minimize differential defections when their joints fall between supports. C clips are also used in fiberglass grating leg systems for panel abutments. Lower nut is welded to clip so installation is from top side of fiberglass grating floor.

L Clips

This lighter duty clip should be specified to hold one load bar to the support for lighter duty loads. It is available for molded and pultruded fiberglass gratings.

W Clips

This diameter fastener is used for holding down plates and covered fiberglass gratings. The W clip’s recessed center allows the fastener to sit flush with this ADA compliant hold down clip.

Guidelines for Engineers & Designers