38 mm 25x152 Superspan Molded FRP Grating
A rectangular 25 x 152 mm mesh at 38 mm depth: long span capability with the drainage of an open deck.
Technical specifications
| Type | Molded FRP grating, superspan rectangular mesh |
|---|---|
| Mesh opening | 25 x 152 mm (1 x 6 in) |
| Depth | 38 mm; 50 mm on request |
| Open area | about 65 to 70% |
| Unit weight | about 10.5 kg/m² at 38 mm depth |
| Standard panel | 1220 x 3660 mm; 1000 x 4000 mm; cut to size |
| Resin systems | Isophthalic polyester; vinyl ester for chemical service |
| Surface | Concave standard; grit on ramps |
| Colours | Light grey, dark grey, yellow, green |
| Fixing | M-clip or C-clip with SS304/SS316 bolts |
Load and span guidance
| Support span | Indicative UDL, span across the 152 mm opening | Indicative UDL, span along the 152 mm opening | Deflection basis |
|---|---|---|---|
| 2.0 m | about 300 kg/m² | about 220 kg/m² | L/200 |
| 2.5 m | about 190 kg/m² | about 140 kg/m² | L/200 |
| 3.0 m | about 130 kg/m² | about 95 kg/m² | L/200 |
| 3.5 m | about 95 kg/m² | about 70 kg/m² | L/200 |
Superspan panels are directional: capacity is higher when the long 152 mm opening runs across the span, because the load-bearing members are then continuous. Always state the span direction on the drawing, and confirm the allowable load against the certified table.
Directional capacity, and why the drawing must say so
The rectangular mesh behaves differently in the two directions. When the 152 mm opening runs across the span, the continuous molded members carry the load and the deck reaches about three metres. When it runs along the span, the deck is working on the cross ribs and capacity drops by roughly a third. Two identical panels can therefore have two different ratings depending on how they are laid, which is why the span direction belongs on the drawing.
The gain from the rectangular mesh is drainage and lightness. At about 10.5 kg/m² the deck is lighter than a pultruded 38 mm section of similar capacity, and the open area of roughly 65 to 70% passes water and debris that a square mesh would hold. The cost is that a 25 x 152 mm opening will accept a foot, a tool or a bottle, so this is not a heel-safe or drop-safe deck.
Where it fits
- Long pedestrian walkways over drainage channels
- Roof and platform decks where rainwater must clear quickly
- Pond and reservoir covers with high open area
- Industrial platforms carrying foot traffic only
- Replacement of steel grating where span is fixed by the existing frame
Lay the panel so the 152 mm opening crosses the span unless the load table for the other direction has been checked. Cut edges are sealed, and where the deck is used as a channel cover the panels should be removable in sections for cleaning.
