📞 Contact UsHomeProductsCatalogueApplicationsProjectsMarketsBlog🎬 VideosTools💰 CalculatorAbout
FRP Grating Specifications

30 mm 20x20 Mini-Mesh Molded FRP Grating

A 20 x 20 mm square opening at 30 mm depth: the fine mesh that keeps heels, caps and small parts on top of the deck.

Technical specifications

TypeMolded FRP grating, mini mesh
Mesh opening20 x 20 mm square
Depth30 mm
Open areaabout 40%
Unit weightabout 9.5 to 10 kg/m²
Standard panel1220 x 3660 mm, 1000 x 4000 mm; cut to size
Resin systemsIsophthalic polyester; vinyl ester for chemical service
SurfaceConcave standard; grit for sloped or wet decks
ColoursLight grey, dark grey, yellow, green, RAL on request
FixingM-clip or C-clip with SS304/SS316 bolts; no drilling

Load and span guidance

Support spanIndicative UDL, 30 mm depthIndicative UDL, 38 mm depthDeflection basis
1.5 mabout 420 kg/m²about 520 kg/m²L/200
2.0 mabout 240 kg/m²about 300 kg/m²L/200
2.5 mabout 155 kg/m²about 195 kg/m²L/200
3.0 mabout 105 kg/m²about 135 kg/m²L/200

Indicative values for a simply supported span under uniform load. Mini-mesh panels are molded, so the mesh, the depth and the resin are fixed at the tool rather than assembled from pultruded bars; the load table for the specific depth applies.

Why the mesh size matters as much as the depth

Stair treads fail on heel width, not on load. A boot heel is roughly 20 to 25 mm across, so a standard 38 mm square opening will swallow it if the foot lands badly, and a 19 or 20 mm opening will not. The same argument applies to a bottle cap on a filling line, a bolt on a service platform above a walkway, and a screwdriver dropped from waist height.

A 20 x 20 mm mesh at 30 mm depth gives that protection at about 10 kg/m², which is still light enough to cut and fit on site with hand tools. It is a molded product, so the opening is uniform in both directions, and the panel has no weak direction the way a pultruded deck can have under a point load.

Where it fits

  • Stair treads and landings where heel passage must be prevented
  • Food and beverage lines over drainage channels
  • Platforms above walkways where dropped objects are a hazard
  • Retail, hotel and public areas needing a fine architectural mesh
  • Machine guards and safety screens with airflow requirements

Cut panels with a carbide blade and seal the cut edge with resin. Because the mesh is fine, the deck holds water longer than an open grating, so sloped installation or a grit surface is advisable where spillage is frequent.

Related resources

FAQ

W
I
I
P
D
I
C
T
I
Y
W
1

Document Preview

Preview mode · For full document, click Download

Download Document

Thank you for your interest. Please fill in your email and company name. Our technical and sales team will contact you within 30 minutes (during working hours) to provide support!

📧 Your information will be sent to [email protected]. We respect your privacy and will never share your data.

Thank You!

Your request has been received successfully.

Our technical and sales team will contact you within 30 minutes (during working hours) to provide the document and professional support!

If you need urgent assistance, please email: [email protected]